三维有限元分析唇侧矫治器的位置改变对上前牙组牙阻抗中心的影响

doi:10.13701/j.cnki.kqyxyj.2017.04.017

口腔医学研究 ›› 2017, Vol. 33 ›› Issue (4): 416-419.DOI: 10.13701/j.cnki.kqyxyj.2017.04.017

三维有限元分析唇侧矫治器的位置改变对上前牙组牙阻抗中心的影响

吕志鹏, 张翼, 王超, 黄倩倩, 王华桥, 张赫^*

重庆医科大学附属口腔医院正畸科,口腔疾病与生物医学重庆市重点实验室,重庆市高校市级口腔生物医学工程重点实验室重庆 401147

收稿日期:2016-09-17 出版日期:2017-04-20 发布日期:2017-04-24
通讯作者: 张赫,电话:13983231065
作者简介:吕志鹏(1990~ ),男,福建人,硕士,主要从事口腔正畸学研究工作。
基金资助:
重庆市卫生局基金资助项目(编号:20141012、2013-2-069、2015MSXM051)

3D Finite Element Analysis--Influence of Labial Brackets Positions on Resistance Center of Maxillary Anterior Teeth.

LV Zhi-peng, ZHANG Yi, WANG Chao, HUANG Qian-qian, WANG Hua-qiao, ZHANG He.

Department of Orthodontics, Stomatological Hospital of Chongqing Medical University, Chongqing 401147, China

Received:2016-09-17 Online:2017-04-20 Published:2017-04-24

摘要/Abstract

摘要： 目的:探究唇侧托槽位置改变对上前牙组牙阻抗中心的影响。方法:建立唇侧片段弓内收力系的三维有限元模型,其中模型包括3个不同托槽位置高度的子模型。弓丝设置为刚性体。以上颌中切牙之间的弓丝平面为起点,通过正中矢状面分别施加平行于咬合平面的内收力,每向上0.5 mm增加一组内收力,当上颌前牙切缘中点的位移与根尖的位移比值接近1时,则认为上前牙发生了整体移动,该施力点的方向通过上颌前牙的阻抗中心,从而确定阻抗中心垂直向的高度;以同样方式在上颌前牙组牙的正中矢状面施加垂直压入力,确定阻抗中心矢状向的位置。结果:上颌中切牙唇侧托槽距离切缘4 mm时,阻抗中心位于上中切牙切缘根方18 mm,腭向13 mm;距离切缘5 mm时,阻抗中心的位置位于上中切牙切缘根方16.5 mm,腭向13 mm;距离切缘6 mm时,阻抗中心的位于上中切牙切缘根方17.5 mm,腭向12 mm。结论:唇侧托槽位置高度改变时,内收上前牙体系中的上前牙组牙阻抗中心位置变化较小。

Abstract: Objective: To investigate the influence of labial bracket position on the resistance center of upper anterior teeth. Methods: The 3D finite element analysis (FEM) models of segment retraction force system with labial brackets placed at different heights were constructed. The arch wire was set as rigid. Retraction force was applied to the anterior teeth (every 0.5mm above the arch wire) and was parallel to the arch wire. When the ratio of the displacement of maxillary incisor edge’s middle point to the apex was close to 1, the bodily movement was considered to occur to the anterior teeth, and the perpendicular distance of center of resistance was recorded. The anteroposterior position of resistance center in the same way was determined. Results: In labial orthodontics, when the distance of maxillary anterior teeth’s brackets to the incisor edge was 5mm, the location of the center of resistance was 16.5mm apical and posterior 13mm to the incisor edge. When the distance was 6mm, the location of center of resistance was 17.5mm apical and posterior 12mm to the incisor edge. When the distance was 4mm, the location of center of resistance was 18mm apical and posterior 13mm to the incisor edge. Conclusion: The positions of resistance center of different labial bracket positions showed little difference.

Key words: Three dimensional finite element analysis , Labial orthodontic treatment, Biomechanics, Center of resistance

中图分类号:

R783.5

吕志鹏, 张翼, 王超, 黄倩倩, 王华桥, 张赫. 三维有限元分析唇侧矫治器的位置改变对上前牙组牙阻抗中心的影响[J]. 口腔医学研究, 2017, 33(4): 416-419.

LV Zhi-peng, ZHANG Yi, WANG Chao, HUANG Qian-qian, WANG Hua-qiao, ZHANG He.. 3D Finite Element Analysis--Influence of Labial Brackets Positions on Resistance Center of Maxillary Anterior Teeth.[J]. Journal of Oral Science Research, 2017, 33(4): 416-419.

参考文献

[1] Liang W, Rong Q, Lin J, et al. Torque control of the maxillary incisors in lingual and labial orthodontics: a 3-dimensional finite element analysis [J]. Am J Orthod Dentofacial Orthop, 2009, 135(3)∶316-322
[2] Geramy A. Initial stress produced in the periodontal membrane by orthodontic loads in the presence of varying loss of alveolar bone: a three-dimensional finite element analysis [J]. Eur J Orthod, 2002, 24(1)∶21-33
[3] Vanden-BulckeM M, Burstone C J, Sachdeva R C, et al.Location of the centers of resistance for anterior teeth during retraction using the laser reflection technique [J]. Am J Orthod Dentofacial Orthop, 1987, 91(5)∶375-384
[4] Vanden Bulcke MM, Dermaut LR, Sachdeva RJ, Burstone CJ. The center of resistance of anterior teeth during intrusion using the laser reflection technique and holographic interferometry [J]. Am J Orthod Dentofacial Orthop, 1986, 90∶211-220
[5] N. Yoshida, Y. Koga, et al. In vivo determination of the centres of resistance of maxillary anterior teeth subjected to retraction forces [J]. Eur J Orthod, 2001, 23∶529-534
[6] Choy K, Kim KH, Burstone CJ.Initial changes of centres of rotation of the anterior segment in response to horizontal forces [J]. Eur J Orthod, 2006, 28(5)∶471-474
[7] Jang HJ, Roh WJ, Joo BH, ,et al. Locating the center of resistance of maxillary anterior teeth retracted by Double J Retractor with palatalminiscrews. Angle Orthod. 2010 Nov;80(6)∶1023-1028
[8] 苏杰华,刘佳莉,张端强,等.上颌前牙段阻抗中心定位的有限元研究[J].生物医学工程学杂志,2014,31(5)∶994-1000
[9] Van Loenen M, Degrieck J, De Pauw G, Dermaut L. Anterior tooth morphology and its effect on torque [J]. Eur J Orthod, 2005, 27∶258-262
[10] Mestriner MA, Enoki C, Mucha JN. Normal torque of the buccal surface of mandibular teeth and its relationship with bracket positioning: a study in normal occlusion [J]. Braz Dent J, 2006, 17∶155-160
[11] Sardarian A, Danaei S,Shahidi S, et al. The effect of vertical bracket positioning on torque and the resultant stress in the periodontal ligament-a finite element study [J]. Prog Orthod, 2014, 15(1)∶50

[1]	陈慧霞, 何展飞, 秦燕军, 李媛. 替牙期伴功能性旋转前牙反牙合矫治方法的回顾性研究[J]. 口腔医学研究, 2018, 34(2): 198-202.
[2]	马艺萌, 高辉, 肖丹娜, 方姝. 基于二维投影建立骨性Ⅱ类错牙合畸形数学模型研究[J]. 口腔医学研究, 2018, 34(1): 77-81.
[3]	陈俊驰, 郭玲. 上中切牙龈缘高度不对称的相关美学参数研究[J]. 口腔医学研究, 2018, 34(1): 82-86.
[4]	黄鹂,周泽渊,王欣,宿晨曦,邹淑娟. 组织蛋白酶K抑制剂对正畸牙移动牙周组织改建的影响[J]. 口腔医学研究, 2017, 33(12): 1250-1253.
[5]	白蕊, 韦代伦, 贺涵, 吴稀, 周容, 黄跃. 舌侧托槽抗扭转性能的三维有限元分析研究[J]. 口腔医学研究, 2017, 33(11): 1218-1222.
[6]	季骏，王天丛，张博，罗佳娣，刘澍，胡勤刚. 安氏II类1分类单双颌前磨牙减数对下颌第三磨牙影响的CBCT研究[J]. 口腔医学研究, 2017, 33(10): 1110-1113.
[7]	高国杰, 章筱悦, 沈刚. 多囊蛋白-1在生长期小鼠颅底蝶枕软骨联合的表达[J]. 口腔医学研究, 2017, 33(8): 824-827.
[8]	李猷, 张淋坤, 张锡忠, 康永歌, 马遥. 大鼠正畸牙移动中NF-κB通路相关差异基因的GO分析[J]. 口腔医学研究, 2017, 33(8): 832-836.
[9]	顾郁嘉, 张卫兵, 张玺, 于剑南, 王林, 赵春洋. 上颌尖牙-侧切牙唇侧易位的分步牵引治疗[J]. 口腔医学研究, 2017, 33(7): 754-757.
[10]	朱玉, 康启超, 阎秀林. 上颌埋伏尖牙引起切牙牙根吸收的预测[J]. 口腔医学研究, 2017, 33(7): 777-781.
[11]	陈立艳, 刘志杰, 苑芳连, 张苗苗, 王兰珠. 颧牙槽嵴区骨宽度及皮质骨厚度的CBCT测量分析[J]. 口腔医学研究, 2017, 33(6): 637-641.
[12]	魏晓慧, 刘利君, 刘红, 宋效庆, 陈天杰, 刘称称. CPP-ACP/ACFP预处理的牙本质与树脂粘结剂粘结作用的研究[J]. 口腔医学研究, 2017, 33(6): 642-645.
[13]	孟秋菊, 王磊昌, 杜熹. FRⅢ矫治器矫治术后的颌面部软硬组织变化及其相关性分析[J]. 口腔医学研究, 2017, 33(6): 654-657.
[14]	常琳, 张端强. 正畸间接粘结技术进展的研究[J]. 口腔医学研究, 2017, 33(6): 681-684.
[15]	尹硕,高辉,肖丹娜,赵明阳. 前牙覆盖覆牙合对下唇软组织形态的影响[J]. 口腔医学研究, 2017, 33(5): 509-512.

三维有限元分析唇侧矫治器的位置改变对上前牙组牙阻抗中心的影响

3D Finite Element Analysis--Influence of Labial Brackets Positions on Resistance Center of Maxillary Anterior Teeth.

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics