牙颌数字化三维建模的研究进展

doi:10.13701/j.cnki.kqyxyj.2019.01.004

口腔医学研究 ›› 2019, Vol. 35 ›› Issue (1): 16-19.DOI: 10.13701/j.cnki.kqyxyj.2019.01.004

牙颌数字化三维建模的研究进展

苏丽, 黄晓峰^*

首都医科大学附属北京友谊医院口腔科北京 100050

收稿日期:2018-02-02 出版日期:2019-01-18 发布日期:2019-01-28
通讯作者: 黄晓峰,E-mail:huangxf1998@163.com
作者简介:苏丽(1992~ ),女,河北保定人,硕士在读,研究方向为数字化口腔。
基金资助:
首都卫生发展科研专项(编号:首发2018-2-1102)

Research Progress on Three-dimensional Occlusion Model

SU Li, HUANG Xiao-feng^*

Department of Stomatology, Beijing Friendship Hospital, Capital Medical University, Beijing 100050, China

Received:2018-02-02 Online:2019-01-18 Published:2019-01-28

摘要/Abstract

摘要： 三维数字化技术在口腔医学中的应用越来越广泛,数字化建模显然是数字化医学的重要基础。目前口腔数字化建模的方法较多,但是不同方法都各有优缺点,尚不存在一种标准的建模方法。因此我们选择目前临床和科研实验中常用的几种建模方法,对其可靠性及精确度进行综述和比较,并对牙颌数字化三维建模方法的未来发展进行展望。

关键词: 数字化建模, 激光扫描, 锥体束计算机断层扫描, 口内扫描

Abstract: The application of three-dimensional digital technology in stomatology is becoming more and more extensive. Digital modeling is obviously the important foundation of digital medicine. At present, there are many methods for digital modeling, but different methods have advantages and disadvantages, and there is no standard modeling method. Several kinds of modeling methods that are commonly used in clinic and scientific research are discussed. In this paper, the reliability and accuracy of the methods are reviewed and compared, and the future development of the digital modeling method is prospected.

Key words: Digital model, Laser scanning, Cone-beam computed tomography, Intraoral impression

苏丽, 黄晓峰. 牙颌数字化三维建模的研究进展[J]. 口腔医学研究, 2019, 35(1): 16-19.

SU Li, HUANG Xiao-feng. Research Progress on Three-dimensional Occlusion Model[J]. Journal of Oral Science Research, 2019, 35(1): 16-19.

参考文献

[1] Akyalcin S, Dyer DJ, English JD,et al. Comparison of 3-dimensional dental models from different sources: diagnostic accuracy and surface registration analysis [J]. Am J Orthod Dentofacial Orthop, 2013, 144(6):831-837.
[2] Fleming PS, Marinho V, Johal A. Orthodontic measurements on digital study models compared with plaster models: a systematic review [J]. Orthod Craniofac Res, 2011,14(1):1-16.
[3] Duret F, Preston JD. CAD/CAM imaging in dentistry [J]. Curr Opin Dent, 1991, 1(2):150-154.
[4] Bidra AS, Taylor TD, Agar JR. Computer-aided technology for fabricating complete dentures: Systematic review of historical background, current status, and future perspectives [J]. J Prosthet Dent, 2013, 109(6):361-366.
[5] Macchi A, Carrafiello G, Cacciafesta V, et al. Three-dimensional digital modeling and set up [J]. Am J Orthod Dentofacial Orthop, 2006, 129(5):605-610.
[6] 郭宏铭,张晓娟,赵勇,等.虚拟排牙的牙根外露检验性研究[J].北京口腔医学, 2013, 21(3):156-158.
[7] Zhang XJ, He L, Guo HM, et al. Integrated three-dimensional digital assessment of accuracy of anterior tooth movement using clear aligners [J]. Korean J Orthod, 2015, 45(6):275-281.
[8] 田卫东,汤炜.口腔颌面数字化外科的应用与展望[J]. 口腔颌面外科杂志, 2008, 18(6):381-385.
[9] Patel N. Integrating three-dimensional digital technologies for comprehensive implant dentistry [J]. J Am Dent Assoc, 2010, 141(2):20S-24S.
[10] 高璐,张晓红,金海威,等.虚拟现实技术在口腔颌面部解剖及三维数字模型构建中的应用[J].中国组织工程研究,2015, 19(46):7492-7497.
[11] 胡昊,白玉兴.口内直接扫描技术的研究进展[J].中华口腔正畸学杂志,2014, 21 (1):40-42.
[12] 陈栋.牙颌模型测量的三维进展[J].医学综述, 2011, 17(6):935-937.
[13] Flügge TV, Schlager S, Nelson K, et al. Precision of intraoral digital dental impressions with iTero and extraoral digitization with the iTero and a model scanner [J]. Am J Orthod Dentofacial Orthop, 2013, 144(3):471-478.
[14] 李晶,王硕,张达,等.口内扫描数字化模型与硅橡胶制取石膏模型测量的对比研究[J].中华口腔正畸学杂志, 2013, 20(3):163-166.
[15] Akyalcin S, Cozad BE, English JD, et al. Diagnostic, accuracy of impression-free digital models [J]. Am J Orthod Dentofacial Orthop, 2013, 144(6):916-922.
[16] Kamimura E, Tanaka S, Takaba M, et al. In vivo evaluation of inter-operator reproducibility of digital dental and conventional impression techniques [J]. PLoS One, 2017, 12(6):e0179188.
[17] 苏庭舒,孙健,陈丽萍.口内数字化印模扫描重复性的研究[J].口腔颌面修复学杂志, 2014, 15(5):291-296.
[18] van der Meer WJ, Andriessen FS, Wismeijer D, et al. Application of intra-oral dental scanners in the digital workflow of implantology [J]. PLoS One, 2012, 7(8):6-7.
[19] Patzelt SB,Lamprinos C,Stampf S, et al. The time efficiency of intraoral scanners:An in vitro comparative study [J]. J Am Dent Assoc,2014,145(6):542-551.
[20] Asquith J, Gillgrass T, Mossey PP. Three-dimensional imaging of orthodontic models: a pilot study [J]. Eur J Orthod, 2007, 29(5):517-522.
[21] Luu NS, Mandich MA, Flores-Mir C, et al. The validity, reliability, and time requirement of study model analysis using cone-beam computed tomography-generated virtual study models [J]. Orthod Craniofac Res, 2014, 17(1):14-26.
[22] Kim J, Heo G, Lagravère MO. Accuracy of laser scanned models compared to plaster models and cone-beam computed tomography [J]. Angle Orthod, 2014,84(3):443-450.
[23] Asquith J, Gillgrass T, Mossey PP. Three-dimensional imaging of orthodontic models: a pilot study [J]. Eur J Orthod, 2007, 29(5):517-522.
[24] Kim J, Lagravére MO. Accuracy of Bolton analysis measured in Laser scanned digital models compared with plaster models (gold standard) and cone-beam computer tomography images [J]. Korean J Orthod, 2016, 46(1):13-19.

牙颌数字化三维建模的研究进展

Research Progress on Three-dimensional Occlusion Model

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 3

编辑推荐

Metrics

[1]	陈小冬, 陈济芬. 数字化口腔扫描系统临床应用研究进展[J]. 口腔医学研究, 2020, 36(7): 611-615.
[2]	江波, 张雪舟, 向梅, 周峰行, 李楠, 张磊, 郑惠源. 数字化印模应用于全牙弓种植固定修复的临床研究[J]. 口腔医学研究, 2019, 35(9): 906-909.
[3]	丁盛,李海晓,李晓和. 双颌前突正畸治疗前后软组织的三维变化[J]. 口腔医学研究, 2015, 31(9): 917-919.