口腔医学研究

口腔医学研究 ›› 2019, Vol. 35 ›› Issue (6): 611-614.DOI: 10.13701/j.cnki.kqyxyj.2019.06.024

• 口腔影像学研究 • 上一篇    

改良式硅橡胶印模定位平行投照技术的临床应用

韩超1,高安天1#,王铁梅1,花凌晨1,李厚轩2,林梓桐1*   

  1. 1. 南京大学医学院附属口腔医院,南京市口腔医院口腔颌面医学影像科 江苏 南京 210008;
    2. 南京大学医学院附属口腔医院,南京市口腔医院牙周科
  • 收稿日期:2018-10-31 出版日期:2019-06-28 发布日期:2019-06-27
  • 通讯作者: 林梓桐,E-mail:linzitong710@163.com，#为共同第一作者
  • 作者简介:韩超(1987~ ),男,江苏南京人,学士,主要从事口腔颌面医学影像技术研究工作。高安天(1995~ ),男,陕西西安人,硕士在读,主要从事口腔颌面外科学研究工作。
  • 基金资助:
    国家自然科学基金(编号:81670996)
    南京市医学科技发展资金项目(编号:QRX17079)

Clinical Application of Silicone Rubber Impression Positioning Paralleling Technique

HAN Chao1, GAO An-tian1#, WANG Tie-mei1, HUA Ling-chen1, LI Hou-xuan2, LIN Zi-tong1*   

  1. 1. Department of Oral and Dentomaxillofacial Radiology, Nanjing Stomatological Hospital, Medical School of Nanjing University, Nanjing 210008, China;
    2. Department of Periodontology, Nanjing Stomatological Hospital, Medical School of Nanjing University, Nanjing 210008, China.
  • Received:2018-10-31 Online:2019-06-28 Published:2019-06-27

PDF (PC)

181

摘要： 目的:探讨改良式硅橡胶印模定位平行投照技术的临床运用。方法:选取24例牙周炎牙周治疗患者及24例牙体牙髓科根管治疗的患者,分别进行硅橡胶印模定位平行投照和分角线投照,分别测量数字式根尖片上沿牙长轴方向的牙体长度(L)及釉牙骨质界牙体宽度(W), 按照牙位分为前牙+上颌磨牙组和下颌磨牙组,使用SPSS 22.0软件进行配对t检验及相关性分析比较2种投照技术2次投照的差异。结果:虽然两种投照技术前后2次投照的牙体长度及宽度的配对t检验均不具有显著性差异(P>0.05), 但是与分角线投照技术相比,改良式硅橡胶印模定位平行投照技术所得到的前后两次根尖片上的牙体长度和宽度的组内相关系数更高。结论: 改良式硅橡胶印模定位投照技术是一种稳定可靠、可操作性强的根尖片投照技术,适用于需要进行纵向定量对比的各类口腔科疾病诊断和分析。

关键词: 硅橡胶印模, 平行投照技术, 分角线投照技术

Abstract: Objective: To explore the application of silicone rubber impression positioning paralleling technique in clinic practice. Methods: 24 periodontitis patients needed repair of periodontal bone defects and 24 endodontic patients needed root canal treatment were performed silicone rubber impression positioning paralleling technique and bisecting-angle technique respectively. The length of the tooth along the long axis of the tooth and the width of tooth at enamelo-cemental junction were measured on the digital periapical radiograph,which were divided into anterior teeth + maxillary molar group and mandibular molar group. Paired t test and reliability test was used to compare the differences and correlations of the periapical radiograph before and after treatment, SPSS 22.0 was used for analysis. Results: Although there was no significant differences of the length and width on periapical radiograph before and after treatment using paired t-test(P>0.05), compared with the bisecting-angle technique, the silicone rubber impression positioning paralleling technique showed stronger correlation, which suggested silicone rubber impression positioning paralleling technique was more stable. Conclusion: The silicone rubber impression positioning paralleling technique is reliable, stable, and relatively simple technique. It is suitable for the diagnosis and analysis of various dental diseases requiring longitudinal quantitative comparison.

Key words: Silicone rubber impression, Paralleling technique, Bisecting-angle technique