不同体积和材料的桩核修复薄弱根管的应力分析

doi:10.13701/j.cnki.kqyxyj.2016.09.015

口腔医学研究 ›› 2016, Vol. 32 ›› Issue (9): 953-956.DOI: 10.13701/j.cnki.kqyxyj.2016.09.015

不同体积和材料的桩核修复薄弱根管的应力分析

王频,范丽苑,谢翠柳,刘敏^*

泸州医学院附属口腔医院修复科四川泸州 646000

收稿日期:2016-02-22 出版日期:2016-09-26 发布日期:2016-09-26
通讯作者: 刘敏,电话:18982769877
作者简介:王频(1978~ ),讲师,硕士,主要从事口腔修复学研究。
基金资助:
四川省卫生厅基金资助项目(编号:【2011】717号)

Stress of Post and Core with Different Sizes and Materials in Restoring Anterior Tooth with Flared Canals

WANG Pin, FAN Li-yuan, XIE Cui-liu, LIU Min^*

Department of Prosthodontics, Hospital of Stomatology, Luzhou Medical College, Luzhou 646000, China

Received:2016-02-22 Online:2016-09-26 Published:2016-09-26

摘要/Abstract

摘要： 目的:分析两种体积不同桩核材料修复薄弱根管的应力分析。方法: 用三维有限元法将建立的9个实验模型分为两组, A组为预成桩核组,B组为解剖形桩核组,将纤维桩联合一根辅桩修复的模型作为A、B两组的对照。在模型牙冠切1/3与中1/3处链接5个点成线状135度100 N的力加载。比较分析各模型牙体组织、树脂粘结剂、桩核3个部位的应力。结果:牙体组织应力值大小与体积成负相关,与弹性模量的变化无关。桩核表面的应力值与弹性模量成负相关。结论:建议使用铸造桩核、编织纤维桩以及纤维桩联合辅桩等体积较大的桩核修复薄弱根管。桩核材料弹性模量的增加可能会增加桩核脱位的风险。

关键词: 桩核, 薄弱根管, 三维有限元

Abstract: Objectives: To assess the stress of post and cores with different sizes and materials in restoring anterior teeth with flared canals. Methods: Nine 3D models of maxillary first incisors with flared canals restored by two post groups were generated. Group A is restored with preformed posts. Group B is restored with anatomic posts. The model of a quartz fiber post combined with just one auxiliary post is the control one for group A and B. Each model was loaded occlusal force of 100 N on the palatal surface of the crowns at 135 degree angles to the long axis of the tooth. The stresses in the dentin, in the cement, in the post and in the core were analyzed. Results: There was an inverse correlation between the stress of dentin and the volume of the posts. It was failed to establish a correlation between the stress of dentin and the modulus of elasticity of the post and core. The stress of the post and core had an inverse correlation with its modulus of elasticity. Conclusion: It is suggested to restore the tooth with flared canals by larger size posts, such as anatomic one. The post and core are more easy to drop off with larger modulus of elasticity.

Key words: Post and core, Teeth with flared canals, Three dimensional finite element analysis

中图分类号:

R783.2

王频,范丽苑,谢翠柳,刘敏. 不同体积和材料的桩核修复薄弱根管的应力分析[J]. 口腔医学研究, 2016, 32(9): 953-956.

WANG Pin, FAN Li-yuan, XIE Cui-liu, LIU Min. Stress of Post and Core with Different Sizes and Materials in Restoring Anterior Tooth with Flared Canals[J]. Journal of Oral Science Research, 2016, 32(9): 953-956.

参考文献

[1] M.N. Ash, S.J. Nelson. Wheeler's dental anatomy, physiology and occlusion [M]. Saunders, St Louis ,8th ed, 2003, 251-261
[2] S.A. Romeed, S.M. Dunne.Stress analysis of different post-luting systems: a three-dimensional finite element analysis [J]. Aust Dent J, 2013,58(1)∶82-88
[3] Meijer HJ, Kulper JH ,et al. Stress distribution around dental implants: influence of superstructure, length of implants,and height of mandible [J]. J prosthet Dent, 1992, 68(1)∶96-102
[4] Ruse ND. Propagation of erroneous data for the modulus of elasticity of periodontal lig-ament and gutta percha in FEM/FEA paper:a story of broken links [J]. Dent Mater, 2008, 24(12)∶1717-1719
[5] Mattos CM, Las Casas EB, Dutra IG, et al. Numerical analysis of the biomechanical behaviour of a weakened root after adhesive reconstruction and post-core rehabilitation [J]. J Dent, 2012, 40(5)∶423-432
[6] Rees JS, Jacopsen PH. Elastic modulus of the periodontal ligament [J]. Biomaterials, 1997, 18(1)∶995-999
[7] Aboushelib MN, Jager ND, Kleverlaan CJ, et al. Effect of loading method on the fracture mechanics of two layered all-ceramic restorative systems [J]. Dent Mater, 2007, 23(8)∶952-959
[8] Albakry M, Guzzato M, Swain MV. Fracture toughness and hardness evaluation of three pressable all-ceramic dental materials [J]. J Dent, 2003, 31(3)∶181-188
[9] Asmussen E, Peutzfeld A, Sahafi A. Finite element analysis of stresses in endodontically treated, dowel-restored teeth [J]. J Prosthet Dent, 2005, 94(4)∶321-329
[10] OyarP. The effects of post-core and crown material and luting agents on stress distribution in tooth restorations [J]. J Prosthet Dent, 2014, 112(2)∶211-219
[11] Marchi GM, P8uIillo I.A,Pimenta LA. Effect of different filling materials in combination with intraradicular post on the resistance to fracture of weakened roots [J]. J oral Rehabjl, 2003, 30(6)∶623-629
[12] Akkayan B. An in vitro study evaluating the effect of ferrule length on fracture resistance of endodontically treated teeth restored with fiber-reinforeed and zireonia dowel systems [J]. J Prosthet Dent, 2004, 92(2)∶155-162
[13] Yang H, Lang LA, Molina A, et al. The effects of dowel design and direction on dowel-and-core restorations [J]. J prosthet Dent, 2001,85(6)∶558-567
[14] Hu YH, Pang LC, Hsu CC, et al. Fracture resistance of endodonticallv treated anterior teeth restored with four post and core systems [J]. Quintessence Int, 2003, 34(5)∶349-355
[15] Ozcopur B, Akman S, Eskitascioglu G, et al. The effect of different posts on fracture strength of roots with vertical fracture and re-attached fragments [J]. Journal of Oral Rehabilitation, 2010, 37(8)∶615-623
[16] QLi , BXu , Y Wang, et al. Effects of auxiliary fiber posts on endodontically treated teeth with flared canals [J]. Operative Dentistry, 2011, 36(4)∶380-389

不同体积和材料的桩核修复薄弱根管的应力分析

Stress of Post and Core with Different Sizes and Materials in Restoring Anterior Tooth with Flared Canals

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

[1]	缑小蕊, 周政, 姜丹丹, 陈苗苗, 纪东. 种植覆盖义齿修复不同骨质类型的KennedyⅠ类缺失的三维有限元分析[J]. 口腔医学研究, 2020, 36(9): 855-860.
[2]	苏涛, 王星星, 向彪, 吴刚, 邹敏. 不同刚度的无托槽隐形矫治器扩大上颌牙弓的有限元分析[J]. 口腔医学研究, 2020, 36(5): 454-458.
[3]	李茜茜, 康婷, 陈燕语, 宋丹阳, 郭玲. 上颌中切牙斜形折裂修复设计的有限元分析[J]. 口腔医学研究, 2020, 36(3): 259-263.
[4]	李希光, 郅克谦, 高岭, 张博, 周民战, 肖林京. 基于三维有限元评价种植体不同倾斜角度在上颌后牙区骨量不足的应力分析[J]. 口腔医学研究, 2019, 35(7): 671-675.
[5]	陈俊良, 刘旭琳, 张潇月, 田欣, 何芸. 短种植体修复牙槽骨严重吸收的下颌第二磨牙的三维有限元分析[J]. 口腔医学研究, 2019, 35(3): 246-250.
[6]	康婷, 石思琼, 赵威, 郑睿, 李茜茜, 解静, 郭玲. 上颌第一前磨牙舌尖斜形折裂不同修复设计的有限元分析[J]. 口腔医学研究, 2019, 35(10): 953-956.
[7]	张彬, 安虹, 郭超, 杨贝贝, 王家亮. 牙槽骨水平吸收条件下上前牙全瓷联冠三维有限元模型的建立[J]. 口腔医学研究, 2019, 35(1): 71-74.
[8]	赵楚翘, 徐一驰, 刘定坤, 杨军星, 魏子清, 唐林俊, 沈杰, 刘宇昆, 刘志辉. 髓腔固位冠及桩核冠修复下颌第一磨牙大面积缺损的生物力学分析[J]. 口腔医学研究, 2018, 34(5): 513-517.
[9]	吴帆, 曹谅, 姜晓南, 赵阿莉, 张国庆, 王利民, 王卫国. 下颌第一磨牙邻面不同高度缺损髓腔固位冠的生物力学分析[J]. 口腔医学研究, 2018, 34(1): 65-68.
[10]	肖丹, 姚远, 黄丰, 刘英路, 何建慧. 不同桩核对Lava锆瓷冠颜色影响的实验研究[J]. 口腔医学研究, 2017, 33(7): 774-776.
[11]	吕志鹏, 张翼, 王超, 黄倩倩, 王华桥, 张赫. 三维有限元分析唇侧矫治器的位置改变对上前牙组牙阻抗中心的影响[J]. 口腔医学研究, 2017, 33(4): 416-419.
[12]	肖丹, 姚远, 黄丰, 刘英路, 何建慧. 3种桩核系统全瓷冠边缘和内部适合性比较的实验研究[J]. 口腔医学研究, 2017, 33(4): 432-435.
[13]	肖燕，沈凯奇. 3D打印纤维桩修复不同形态根管的有限元分析[J]. 口腔医学研究, 2017, 33(3): 273-277.
[14]	高雪，张栋梁. 三维有限元法在舌侧正畸领域的应用[J]. 口腔医学研究, 2017, 33(3): 342-344.
[15]	吕儒雅, , 王婧, 刘海霞, 韩蓓蕾, , 王为. 安氏Ⅱ¹类患者颞下颌关节三维有限元分析[J]. 口腔医学研究, 2017, 33(2): 194-198.