口腔医学研究 ›› 2020, Vol. 36 ›› Issue (3): 221-225.DOI: 10.13701/j.cnki.kqyxyj.2020.03.008

• 修复粘接研究 • 上一篇    下一篇

EDTA和EDC预处理对两步法自酸蚀粘接剂粘接强度的影响

邓婷1,2, 刘敏1,2, 刘雯1,2, 王雯1,2, 谢翠柳1,2*   

  1. 1. 西南医科大学附属口腔医院修复科 四川 泸州 646000;
    2. 西南医科大学口颌面修复重建与再生实验室 四川 泸州 646000
  • 收稿日期:2019-09-02 出版日期:2020-05-15 发布日期:2020-05-15
  • 通讯作者: 谢翠柳,E-mail:xiecl10@163.com
  • 作者简介:邓婷(1992~),女,四川自贡人,硕士在读,主要从事口腔修复种植方向研究工作。
  • 基金资助:
    西南医科大学附属口腔医院青年项目(编号:201806)

Effect of Pretreatment with EDTA and EDC on Bond Strength of Two-step Self-etching Adhesive

DENG Ting1,2, LIU Min1,2, LIU Wen1,2, WANG Wen1,2, XIE Cuiliu1,2*   

  1. 1. Department of Prosthodontics, the Affiliated Stomatology Hospital of Southwest Medical University, Luzhou 646000, China;
    2. Oral & Maxillofacial Reconstruction and Regeneration Laboratory, Southwest Medical University, Luzhou 646000, China
  • Received:2019-09-02 Online:2020-05-15 Published:2020-05-15

摘要: 目的:探讨EDTA和EDC预处理对两步法自酸蚀粘接剂粘接强度及粘接耐久性的影响。方法:第三磨牙56颗根据表面处理方式及是否老化处理随机分成8组(n=7),A、A1组:Clearfil SE Bond;B、B1组:17%EDTA+Clearfil SE Bond;C、C1组:0.3 mol/L EDC+Clearfil SE Bond;D、D1组:17%EDTA+0.3 mol/L EDC+Clearfil SE Bond。A1、B1、C1、D1组试件进行老化处理。每组随机抽取5个试件检测粘接强度,观察、统计断裂模式;每组其余2个试件观察纵剖面形貌。结果:D组即刻粘接强度最高,与A组比较差异有统计学意义(P<0.05);C组与C1组、D组与D1组比较差异无统计学意义(P>0.05),具有粘接耐久性。混合断裂是主要的断裂模式,各组比较差异无统计学意义。B、B1和D、D1组混合层树脂突增多增长,C1、D1组混合层未见明显裂纹。结论:17%EDTA+0.3 mol/L EDC预处理可以提高两步法自酸蚀粘接剂的即刻粘接强度,并具有粘接耐久性。

关键词: 乙二胺四乙酸, 碳二亚胺盐酸盐, 牙本质, 粘接强度

Abstract: Objective: To study the effect of pretreatment with EDTA and EDC on the bond strength of two-step self-etching adhesive. Methods: 56 third molars were randomly divided into 8 groups according the dentin surface treatment and whether or not aging (n=7), group A and A1: Clearfil SE Bond; group B and B1:17% EDTA+Clearfil SE Bond; group C and C1:0.3 mol/L EDC+Clearfil SE Bond; group D and D1:17% EDTA+ 0.3 mol/L EDC+Clearfil SE Bond. Specimens of A1, B1, C1 and D1 were conducted aging test. 5 specimens were randomly selected from each group to test the bond strength and analyze the failure mode. The longitudinal profile morphology of the remaining 2 specimens in each group was observed. Results: Group D had the highest immediate bond strength, and the difference with group A was statistically significant (P<0.05). The difference between group C and C1, group D and D1 was no statistically significant (P>0.05). Mixed fracture was the main failure mode, and the difference was no statistically significant. Resin tags in group B, B1, D and D1 were more and longer than other groups, and no cracks were found in the mixing layer of group C1 and D1. Conclusion: Pretreatment with 17% EDTA+0.3 mol/L EDC can improve immediate dentin bond strength of two-step self-etching adhesive and the adhesion is durable.

Key words: ethylene diamine tetraacetic acid, carbodiimide, dentin, bond strength