3D打印在口腔正畸临床诊疗中的应用进展

doi:10.13701/j.cnki.kqyxyj.2019.09.004

摘要/Abstract

摘要： 3D打印技术自问世以来,在各领域发挥出重要的作用,3D打印技术被誉为颠覆性技术,改变了传统的制造业。该技术与口腔医学有着紧密的关系,并且随着三维成像技术的发展和建模技术的进步,如锥形束计算机断层扫描、模型扫描和口腔内扫描技术,以及在牙科领域使用计算机辅助设计与计算机辅助制造技术,都推动着3D打印技术的进步与完善。在数字化医疗和精准医疗模式的大背景下,3D打印技术在口腔正畸临床诊疗中的应用越来越广泛,为临床诊疗提供了巨大的支持。本文综述了3D打印技术在临床口腔正畸诊疗中的应用。

关键词: 3D打印, 口腔正畸, 个性化诊疗, 精准医疗

Abstract: After its inception, 3D printing technology has played an important role in various fields. 3D printing technology is acclaimed as the subversive technology and has changed the traditional manufacturing industry. The technology has a close relationship with dental medicine. With the development of three-dimensional imaging technology and advancement in modeling techniques, such as cone-beam computed tomography, model scanning and intra-oral scanning technology, and CAD/CAM technology in the dental field, the progress and improvement of 3D printing technology are promoted. Under the background of digital medicine and precise medical model, 3D printing technology has become more and more widely used in the clinical diagnosis and treatment of orthodontics, and has provided tremendous support for clinical diagnosis and treatment. This article reviews the application of 3D printing technology in the clinical diagnosis and treatment of orthodontics.

Key words: 3D printing, orthodontics, personalized diagnosis and treatment, precision medicine

花超超, 张荣和. 3D打印在口腔正畸临床诊疗中的应用进展[J]. 口腔医学研究, 2019, 35(9): 833-836.

HUA Chaochao, ZHANG Ronghe. Application of 3D Printing Technology in Clinical Diagnosis and Treatment of Orthodontics[J]. Journal of Oral Science Research, 2019, 35(9): 833-836.

参考文献

[1] Dawood A, Marti MB, Sauret-Jackson V, et al. 3D printing in dentistry [J]. Br Dent J, 2015, 219(11):521-529.
[2] Rengier F, Mehndiratta A, von Tengg-Kobligk H, et al. 3D printing based on imaging data: review of medical applications [J]. Int J Comput Assist Radiol Surg, 2010, 5(4):335-341.
[3] Kim SY, Shin YS, Jung HD, et al. Precision and trueness of dental models manufactured with different 3-dimensional printing techniques [J]. Am J Orthod Dentofacial Orthop, 2018, 153(1):144-153.
[4] Wan HW, Yusoff Y, Mardi NA. Comparison of reconstructed rapid prototyping models produced by 3-dimensional printing and conventional stone models with different degrees of crowding [J]. Am J Orthod Dentofacial Orthop, 2017, 151(1):209-218.
[5] 马丹,张德强,高奇,等.口腔正畸牙齿的精度对比[J].机械设计与制造,2017,增刊:34-36.
[6] Rosvall MD, Fields HW, Ziuchkovski J, et al. Attractiveness, acceptability, and value of orthodontic appliances [J]. Am J Orthod Dentofacial Orthop, 2009, 135(3):271-276, 276-277.
[7] 白玉兴.国产化无托槽隐形矫治技术的研究与临床应用现状[J].中华口腔医学杂志,2010,45(11):659-662.
[8] Fujita K. Development of lingual-bracket technique. (Part 3) Inclination of lingual surface of the teeth and improvement of lingual-bracket (author's transl) [J]. Nihon Kyosei Shika Gakkai Zasshi, 1978, 37(4):381-384.
[9] Kurz C, Swartz ML, Andreiko C. Lingual orthodontics: a status report. Part 2: Research and development [J]. J Clin Orthod, 1982, 16(11):735-740.
[10] Miyawaki S, Yasuhara M, Koh Y. Discomfort caused by bonded lingual orthodontic appliances in adult patients as examined by retrospective questionnaire [J]. Am J Orthod Dentofacial Orthop, 1999, 115(1):83-88.
[11] 荆璇,武秀萍,王军.舌侧矫治技术的临床研究进展[J].国际口腔医学杂志,2018,45(1):100-105.
[12] Wiechmann D. Lingual orthodontics (part 2): archwire fabrication [J]. J Orofac Orthop, 1999, 60(6):416-426.
[13] 刘云峰,郑晓东,李伯休,等.基于SLM的个性化舌侧托槽的数字化设计与成型[J].浙江工业大学学报,2017,45(5):506-509.
[14] 林泽,陈军,李雪.数字化3D打印技术在口腔舌侧正畸托槽粘接中应用研究[J].中国实用口腔科杂志,2016,9(2):104-107.
[15] Gainsforth BL. Sculpture in orthodontics [J]. J Am Dent Assoc, 1946, 33:574-581.
[16] 朱婷婷,米丛波.种植体支抗应用中并发症防治的研究进展[J].中华口腔正畸学杂志,2010,17(1):47-50.
[17] Lam R, Goonewardene MS, Allan BP, et al. Success rates of a skeletal anchorage system in orthodontics: A retrospective analysis [J]. Angle Orthod, 2018, 88(1):27-34.
[18] 仇玲玲,厉松,白玉兴.基于锥形束CT的正畸种植体导板设计及其引导下种植体植入安全性和稳定性的初步评价[J].中华口腔医学杂志,2016,51(6):336-340.
[19] Ngan P, Moon W. Evolution of class Ⅲ treatment in orthodontics [J]. Am J Orthod Dentofacial Orthop, 2015, 148(1):22-36.
[20] Hino CT, Cevidanes LH, Nguyen TT, et al. Three-dimensional analysis of maxillary changes associated with facemask and rapid maxillary expansion compared with bone anchored maxillary protraction [J]. Am J Orthod Dentofacial Orthop, 2013, 144(5):705-714.
[21] 梁舒然,王凡,周冬青,等.三维打印钛板支抗前方牵引治疗骨性Ⅲ类错牙合畸形的初步应用[J].中华口腔医学杂志,2017,52(12):753-755.
[22] 陈慧,郭宏铭,白玉兴,等.CAD/CAM转移托盘粘接托槽位置准确性研究[J].北京口腔医学,2012,20(5):270-273.
[23] 刘浩,王鹏来,王海岚,等.间接粘结中托槽转移精确度的比较[J].中华口腔正畸学杂志,2016,23(1):17-20.
[24] 孔卫东,王淑范,王迪,等.选区激光熔化直接成型个性化舌侧托槽的研究[J].激光技术,2012,36(3):301-306, 311.
[25] Graf S, Cornelis MA, Hauber GG, et al. Computer-aided design and manufacture of hyrax devices: Can we really go digital [J]. Am J Orthod Dentofacial Orthop, 2017, 152(6):870-874.