个性化钛网在口腔种植骨增量中的应用

doi:10.13701/j.cnki.kqyxyj.2019.11.001

口腔医学研究 ›› 2019, Vol. 35 ›› Issue (11): 1011-1015.DOI: 10.13701/j.cnki.kqyxyj.2019.11.001

• 特约述评 • 下一篇

个性化钛网在口腔种植骨增量中的应用

季平^*, 杨生

重庆医科大学附属口腔医院口腔疾病与生物医学重庆市重点实验室重庆市高校市级口腔生物医学工程重点实验重庆 400016

收稿日期:2019-02-02 出版日期:2019-11-28 发布日期:2019-11-21
通讯作者: 季平,E-mail:jiping@hospital.cqmu.edu.cn
作者简介:季平,男,1962年出生,医学博士,主任医师,教授,博士生导师,现任重庆医科大学附属口腔医院院长。兼任中华口腔医学会口腔医学教育专委会、颌面外科专委会、种植专委会、口腔颌面-头颈肿瘤专委会、口腔医疗服务分会等常务委员,重庆市口腔医学会会长。担任《口腔医学研究》、《重庆医学》等多本杂志副主编、编委,任《口腔种植学词典》等多部著作副主编、编委。
基金资助:
国家自然科学基金(编号:31871464、81500894) 中国博士后基金资助面上项目(编号:2017M620417) 重庆市研究生导师团队建设项目(编号:dstd201806) 重庆市自然科学基金(编号:cstc2019jcyj-msxmX0366)

Application of Custom-made Titanium Mesh in Implant Dentistry for Bone Augmentation

JI Ping^*, YANG Sheng

Stomatological Hospital of Chongqing Medical University, Chongqing Key Laboratory of Oral Diseases and Biomedical Sciences, Chongqing Municipal Key Laboratory of Oral Biomedical Engineering of Higher Education, Chongqing 400016, China

Received:2019-02-02 Online:2019-11-28 Published:2019-11-21

摘要/Abstract

摘要： 引导骨组织再生(guided bone regeneration,GBR)一直以来是口腔种植修复研究领域的热点,也是临床难点技术问题之一。近年来,钛网因其良好的机械性能和固定支持作用在GBR治疗中应用广泛,但传统成品钛网无法完全贴合牙槽骨形态,易导致黏膜或伤口撕裂、钛网暴露等并发症。随着3D打印技术的发展,可利用计算机辅助设计/计算机辅助制造(computer aided manufacturing/computer aided design,CAD/CAM)技术设计制作特定形状、厚度及孔隙大小的个性化钛网,在拥有传统钛网优点的同时更加贴合骨缺损部位,极大缩短手术时长及降低钛网暴露率,尤其适用于大面积、解剖形态复杂的骨缺损病例。本文就个性化3D打印钛网在口腔种植骨增量中的应用和研究现状进行介绍。

关键词: 个性化钛网, 骨增量, 引导骨再生, 3D打印技术

Abstract: Guided bone regeneration (GBR) has always been the research hotspots in the field of dental implantology research, and it is also one of the difficulties in clinical technology. In recent years, titanium mesh has been widely used in GBR treatment owing to its good mechanical properties and structure support function. However, the traditional titanium mesh can not completely conform to the alveolar bone morphology, which may lead to mucosal or wound tearing, titanium mesh exposure, and other complications. With the rise of 3D printing technology, CAD/CAM technology can be used to design and manufacture custom-made titanium mesh with specific shape, thickness and pore size. Custom-made titanium mesh can better fit the bone defects and significantly reduce the surgery time and the exposure rate, especially suitable for large bone defect with complex anatomical morphology. This paper introduces the application and research status of custom-made titanium mesh used for bone augmentation in implant treatment.

Key words: custom-made titanium mesh, bone augmentation, guided bone regeneration, 3D printing technology

季平, 杨生. 个性化钛网在口腔种植骨增量中的应用[J]. 口腔医学研究, 2019, 35(11): 1011-1015.

JI Ping, YANG Sheng. Application of Custom-made Titanium Mesh in Implant Dentistry for Bone Augmentation[J]. Journal of Oral Science Research, 2019, 35(11): 1011-1015.

参考文献

[1] Esposito M, Grusovin MG, Kwan S, et al. Interventions for replacing missing teeth: bone augmentation techniques for dental implant treatment [J]. Aust Dent J, 2010, 54(1): 70-71.
[2] McAllister BS, Haghighat K. Bone augmentation techniques [J]. J Periodontol, 2007, 78(3): 377-396.
[3] Chiapasco M, Casentini P, Zaniboni M. Bone augmentation procedures in implant dentistry [J]. Int J Oral Maxillofac Implants, 2009, 24(Suppl): 237-259.
[4] Tolstunov L, Hamrick JFE, Broumand V, et al. Bone augmentation techniques for horizontal and vertical alveolar ridge deficiency in oral implantology [J]. Oral Maxillofac Surg Clin North Am, 2019, 31(2): 163-191.
[5] Esposito M, Grusovin MG, Kwan S, et al. Interventions for replacing missing teeth: bone augmentation techniques for dental implant treatment [J]. Cochrane Database Syst Rev, 2008, (3): CD003607.
[6] Retzepi M, Donos N. Guided bone regeneration: biological principle and therapeutic applications [J]. Clin Oral Implants Res, 2010, 21(6): 567-576.
[7] Rakhmatia YD, Ayukawa Y, Furuhashi A, et al. Current barrier membranes: Titanium mesh and other membranes for guided bone regeneration in dental applications [J]. J Prosthodont Res, 2013, 57(1): 3-14.
[8] Briguglio F, Falcomata D, Marconcini S, et al. The use of titanium mesh in guided bone regeneration: a systematic review [J]. Int J Dent, 2019,2019: 9065423.
[9] Inoue K, Nakajima Y, Omori M, et al. Reconstruction of the alveolar bone using bone augmentation with selective laser melting titanium mesh sheet: a report of 2 cases [J]. Implant Dent, 2018, 27(5): 602-607.
[10] Lee SH, Moon JH, Jeong CM, et al. The mechanical properties and biometrical effect of 3D preformed titanium membrane for guided bone regeneration on alveolar bone defect [J]. Biomed Res Int, 2017, 2017: 7102123.
[11] Ciocca L, Fantini M, De Crescenzio F, et al. CAD-CAM prosthetically guided bone regeneration using preformed titanium mesh for the reconstruction of atrophic maxillary arches [J]. Comput Methods Biomech Biomed Engin, 2013, 16(1): 26-32.
[12] Jung GU, Jeon JY, Hwang KG, et al. Preliminary evaluation of a three-dimensional, customized, and preformed titanium mesh in peri-implant alveolar bone regeneration [J]. J Korean Assoc Oral Maxillofac Surg, 2014, 40(4): 181.
[13] Gao H, Li X, Wang C, et al. Mechanobiologically optimization of a 3D titanium-mesh implant for mandibular large defect: A simulated study [J]. Mater Sci Eng C Mater Biol Appl, 2019, 104:109934.
[14] Boyne PJ, Cole MD, Stringer D, et al. A technique for osseous restoration of deficient edentulous maxillary ridges [J]. J Oral Maxillofac Surg, 1985, 43(2): 87-91.
[15] Sagheb K, Schiegnitz E, Moergel M, et al. Clinical outcome of alveolar ridge augmentation with individualized CAD-CAM-produced titanium mesh [J]. Int J Implant Dent, 2017, 3(1): 36.
[16] Levine R, Manji A, Faucher J, et al. Use of titanium mesh in implant site development for restorative-driven implant placement: case report. Part 2: surgical protocol for single-tooth esthetic zone sites [J]. Compend Contin Educ Dent, 2014, 35(5): 324, 326, 328, 330-333.
[17] Sumida T, Otawa N, Kamata YU, et al. Custom-made titanium devices as membranes for bone augmentation in implant treatment: Clinical application and the comparison with conventional titanium mesh [J]. J Craniomaxillofac Surg, 2015, 43(10): 2183-2188.
[18] Otawa N, Sumida T, Kitagaki H, et al. Custom-made titanium devices as membranes for bone augmentation in implant treatment: Modeling accuracy of titanium products constructed with selective laser melting [J]. J Craniomaxillofac Surg, 2015, 43(7): 1289-1295.
[19] Ciocca L, Fantini M, De Crescenzio F, et al. Direct metal laser sintering (DMLS) of a customized titanium mesh for prosthetically guided bone regeneration of atrophic maxillary arches [J]. Med Biol Eng Comput, 2011, 49(11): 1347-1352.
[20] Cucchi A, Giavatto MA, Giannatiempo J, et al. Custom-made titanium mesh for maxillary bone augmentation with immediate implants and delayed loading [J]. J Oral Implantol, 2019, 45(1): 59-64.
[21] Zita Gomes R, Paraud Freixas A, Han CH, et al. Alveolar ridge reconstruction with titanium meshes and simultaneous implant placement: a retrospective, multicenter clinical study [J]. Biomed Res Int, 2016, 2016:5126838.
[22] Hartmann A, Hildebrandt H, Schmohl JU, et al. Evaluation of risk parameters in bone regeneration using a customized titanium mesh: results of a clinical study [J]. Implant Dent, 2019. [Epub ahead of print]
[23] Ciocca L, Lizio G, Baldissara P, et al. Prosthetically CAD-CAM-guided bone augmentation of atrophic jaws using customized titanium mesh: preliminary results of an open prospective study [J]. J Oral Implantol, 2018, 44(2): 131-137.
[24] Pellegrino G, Lizio G, Corinaldesi G, et al. Titanium mesh technique in rehabilitation of totally edentulous atrophic maxillae: a retrospective case series [J]. J Periodontol, 2016, 87(5): 519-528.
[25] Tallarico M, Ceruso FM, Muzzi L, et al. Effect of simultaneous immediate implant placement and guided bone reconstruction with ultra-fine titanium mesh membranes on radiographic and clinical parameters after 18 months of loading [J]. Materials (Basel), 2019, 12(10), pii: E1710.
[26] Torres J, Tamimi F, Alkhraisat MH, et al. Platelet-rich plasma may prevent titanium-mesh exposure in alveolar ridge augmentation with anorganic bovine bone [J]. J Clin Periodontol, 2010, 37(10): 943-951.

个性化钛网在口腔种植骨增量中的应用

Application of Custom-made Titanium Mesh in Implant Dentistry for Bone Augmentation

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 14

编辑推荐

Metrics

[1]	程璐, 史剑杰. 骨膜减张技术在引导骨再生术中的应用研究进展[J]. 口腔医学研究, 2020, 36(9): 814-816.
[2]	乐柯, 董衡, 陈力, 杨光雯, 陈琳, 刘晖, 周娜, 牟永斌. 应用三维预成型钛网在上颌前牙区骨增量疗效的临床研究[J]. 口腔医学研究, 2020, 36(5): 481-485.
[3]	徐鸿玮, 储顺礼. 下颌后牙区水平向骨增量研究进展[J]. 口腔医学研究, 2020, 36(4): 321-323.
[4]	呙誉东, 周炼. 帐篷螺丝技术在上前牙区连续缺失种植修复中的疗效评价[J]. 口腔医学研究, 2020, 36(3): 298-301.
[5]	杨栋, 华先明, 李寒月, 董维理, 张晨, 曹正国. 一种牙周加速成骨正畸的改良术式和改良悬吊缝合法的设计、应用及初步评价[J]. 口腔医学研究, 2019, 35(9): 841-845.
[6]	于文凤, 赵世俊, 吕敏敏, 崔凤林, 康梅珍, 张志媛. 浓缩生长因子在上颌前牙区引导骨再生术中的临床应用[J]. 口腔医学研究, 2019, 35(7): 676-680.
[7]	李德超, 王心彧. 基于牵张成骨骨增量的种植前外科探讨[J]. 口腔医学研究, 2019, 35(4): 313-315.
[8]	于婉琦, 杨诗卉, 周哲, 周延民, 赵静辉. 老年患者微创上颌窦底提升同期种植的临床研究[J]. 口腔医学研究, 2019, 35(3): 258-261.
[9]	白丽云, 季平, 李显, 李林林, 高慧, 王超. 不同厚度的3D打印个性化钛网的三维有限元分析[J]. 口腔医学研究, 2019, 35(1): 75-79.
[10]	王超, 夏荣, 刘芮, 肖楠楠. 3D打印个性化钛网重建牙槽嵴骨缺损的实验研究[J]. 口腔医学研究, 2019, 35(1): 80-83.
[11]	朱艺丹, 何苗苗, 刘加涛, 刘艳云, 刘玉慧, 徐宁, 唐一月, 余占海. 载PTH-Fc/PLCL/SF静电纺丝屏障膜的构建与性能研究[J]. 口腔医学研究, 2018, 34(8): 913-918.
[12]	杜宝霞, 王晓容, 尹国相, 杨刚, 张伟. 3D打印预制赝复体即刻修复上颌骨前部缺损[J]. 口腔医学研究, 2018, 34(1): 56-59.
[13]	罗正文, 刘济远, 李佳, 潘剑. 引导组织再生生物膜应用于拔牙术后牙槽骨缺损修复的临床研究[J]. 口腔医学研究, 2017, 33(7): 782-786.
[14]	白冰, 朱静涛, 冯丽芳, 宋荣博. 新型GBR胶原膜的早期动物体内植入实验研究[J]. 口腔医学研究, 2015, 31(3): 226-229.