四种往复运动单支锉系统的研究进展

doi:10.13701/j.cnki.kqyxyj.2020.02.005

口腔医学研究 ›› 2020, Vol. 36 ›› Issue (2): 111-113.DOI: 10.13701/j.cnki.kqyxyj.2020.02.005

四种往复运动单支锉系统的研究进展

冯海玲, 史璐^*

郑州大学第一附属医院牙体牙髓科河南郑州 450000

收稿日期:2019-03-29 出版日期:2020-02-28 发布日期:2020-04-24
通讯作者: 史璐,E-mail:lsrq@zzu.edu.cn
作者简介:冯海玲(1992~),女,安徽人,硕士在读,研究方向:牙体牙髓病学。

A Review of Four Reciprocating Single-file Systems

FENG Hailing, SHI Lu^*

Department of Endodontics, the First Affiliated Hospital of Zhengzhou University, Zhengzhou University, Zhengzhou 450000, China

Received:2019-03-29 Online:2020-02-28 Published:2020-04-24

摘要/Abstract

摘要： 往复运动单支锉的研发是根管预备理念一大突破,热处理镍钛合金的应用使这一理念在临床得以实施。往复运动镍钛器械性能优越,操作简单易学,已在临床广泛使用,本文就4种往复运动单支锉的设计特点、临床操作性能做一综述。

关键词: 往复运动, 成形能力, 抗折断能力, 根尖碎屑推出, 牙本质微裂

Abstract: The introduction of reciprocating single file is a breakthrough in the concept of root canal preparation. The application of thermal-treated nickel-titanium alloy enables this concept to be implemented in clinic. With superior properties and short learning curve, reciprocating nickel-titanium instruments have been widely used clinically. This article reviews the design characteristics and clinical operation properties of four reciprocating single-file systems.

Key words: reciprocating motion, shaping ability, fracture resistance, apical debris extrusion, dentinal microcracks

冯海玲, 史璐. 四种往复运动单支锉系统的研究进展[J]. 口腔医学研究, 2020, 36(2): 111-113.

FENG Hailing, SHI Lu. A Review of Four Reciprocating Single-file Systems[J]. Journal of Oral Science Research, 2020, 36(2): 111-113.

参考文献

[1] Yared G. Canal preparation using only one Ni-Ti rotary instrument: preliminary observations [J]. Int Endod J, 2008, 41(4):339-344.
[2] Bürklein S, Hinschitza K, Dammaschke T, et al. Shaping ability and cleaning effectiveness of two single-file systems in severely curved root canals of extracted teeth: Reciproc and WaveOne versus Mtwo and ProTaper [J]. Int Endod J, 2012, 45(5):449-461.
[3] Adιgüzel M,Capar ID. Comparison of cyclic fatigue resistance of WaveOne and WaveOne Gold small, primary, and large instruments [J]. J Endod, 2017, 43(4):623-627.
[4] Özyürek T. Cyclic fatigue resistance of Reciproc, WaveOne, and WaveOne Gold nickel-titanium instruments [J]. J Endod, 2016, 42(10):1536-1539.
[5] 邵彤菲,侯晓玫,侯本祥.往复运动镍钛锉根管预备成形能力的体外研究[J].华西口腔医学杂志, 2014, 32(6):606-610.
[6] Saber SE, Nagy MM, Schäfer E. Comparative evaluation of the shaping ability of WaveOne, Reciproc and OneShape single-file systems in severely curved root canals of extracted teeth [J]. Int Endod J, 2015, 48(1):109-114.
[7] Bürklein S, Flüch S, Schäfer E. Shaping ability of reciprocating single-file systems in severely curved canals: WaveOne and Reciproc versus WaveOne Gold and Reciproc blue [J]. Odontology, 2019, 107(1):96-102.
[8] Mamede-Neto I, Borges AH, Guedes OA, et al. Root canal transportation and centering ability of nickel-titanium rotary instruments in mandibular premolars assessed using cone-beam computed tomography [J]. Open Dent J, 2017, 11:71-78.
[9] Keskin C, Demiral M, Sarιyιlmaz E. Comparison of the shaping ability of novel thermally treated reciprocating instruments [J]. Restor Dent Endod, 2018, 43(2):e15.
[10] Keskin C, Sariyilmaz E, Demiral M. Shaping ability of Reciproc Blue reciprocating instruments with or without glide path in simulated S-shaped root canals [J]. J Dent Res Dent Clin Dent Prospects, 2018, 12(1):63-67.
[11] Kiefner P, Ban M, De-Deus G. Is the reciprocating movement per se able to improve the cyclic fatigue resistance of instruments [J]. Int Endod J, 2014, 47(5):430-436.
[12] Topçuoĝlu HS, Düzgün S, Aktι A, et al. Laboratory comparison of cyclic fatigue resistance of WaveOne Gold, Reciproc and WaveOne files in canals with a double curvature [J]. Int Endod J, 2017,50(7):713-717.
[13] Keskin C, Inan U, Demiral M, et al. Cyclic fatigue resistance of Reciproc Blue, Reciproc, and WaveOne Gold reciprocating instruments [J]. J Endod, 2017, 43(8):1360-1363.
[14] Kim HC,Kwak SW,Cheung GS, et al. Cyclic fatigue and torsional resistance of two new nickel-titanium instruments used in reciprocation motion: Reciproc versus WaveOne [J]. J Endod, 2012, 38(4):541-544.
[15] Cheung GS, Zhang EW, Zheng YF. A numerical method for predicting the bending fatigue life of NiTi and stainless steel root canal instruments [J]. Int Endod, 2011, 44(4):357-361.
[16] Pedullà E, Franciosi G, Ounsi HF, et al. Cyclic fatigue resistance of nickel-titanium instruments after Immersion in Irrigant Solutions with or without surfactants [J]. J Endod, 2014, 40(8):1-5.
[17] Jamleh A, Adorno CG, Ebihara A, et al. Effect of nickel titanium file design on the root surface strain and apical microcracks [J]. Aust Endod J, 2016, 42(1):25-31.
[18] Kansal R, Rajput A, Talwar S, et al. Assessment of dentinal damage during canal preparation using reciprocating and rotary files [J]. J Endod, 2014, 40(9): 1443-1446.
[19] Pedullà E, Genovesi F, Rapisarda S, et al. Effects of 6 single-File systems on dentinal crack formation [J]. J Endod, 2017, 43(3):456-461.
[20] Uur Aydιn Z, Keskin NB, Özyürek T. Effect of Reciproc blue, XP-endo shaper, and WaveOne gold instruments on dentinal microcrack formation: A micro-computed tomographic evaluation [J]. Microsc Res Tech, 2019, 82(6):856-860.
[21] Stringheta CP, Pelegrine RA, Kato AS, et al. Micro-computed tomography versus the cross-sectioning method to evaluate dentin defects induced by different mechanized instrumentation techniques [J]. J Endod, 2017, 43(12):2102-2107.
[22] Borges ÁH, Damiāo MS, Pereira TM, et al. Influence of cervical preflaring on the incidence of root dentin defects [J]. J Endod, 2018, 44(2):286-291.
[23] Kwak SW, Ha JH, Cheung GS, et al. Effect of the glide path establishment on the torque generation to the files during instrumentation: an in vitro measurement [J]. J Endod, 2018, 44(3):496-500.
[24] Caviedes-Bucheli J, Rios-Osorio N, Rey-Rojas M, et al. Substance P and Calcitonin gene-related peptide expression in human periodontal ligament after root canal preparation with Reciproc Blue, WaveOne Gold, XP EndoShaper and hand files [J]. Int Endod J, 2018, 51(12):1358-1366.
[25] Bürklein S, Schäfer E. Apically extruded debris with reciprocating single-file and full-sequence rotary instrumentation systems [J]. J Endod, 2012, 38(6): 850-852.
[26] Topçuoĝlu HS, Düzgün S, Akpek F, et al. Influence of a glide path on apical extrusion of debris during canal preparation using single-file systems in curved canals [J]. Int Endod J, 2016, 49(6):599-603.

四种往复运动单支锉系统的研究进展

A Review of Four Reciprocating Single-file Systems

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

编辑推荐

Metrics

[1]	于江利, 谭瑶, 侯晓玫, 韩怡. 机用镍钛通畅锉用于S形根管成形能力的体外研究[J]. 口腔医学研究, 2020, 36(8): 781-785.
[2]	韩怡, 付宏宇, 侯晓玫. 大锥度通畅通道在模拟弯曲根管中对ProTaper Next成形能力的影响[J]. 口腔医学研究, 2019, 35(1): 89-93.
[3]	韩怡, 白雨豪, 侯晓玫. 机用镍钛通畅锉在模拟根管中成形能力的对比研究[J]. 口腔医学研究, 2018, 34(2): 121-124.
[4]	占云燕,杨国斌. ProTaperNext锉和WaveOne锉根管成形能力的对比研究[J]. 口腔医学研究, 2016, 32(9): 925-928.