3D 打印在口腔临床工作的应用

doi:10.13701/j.cnki.kqyxyj.2019.04.005

口腔医学研究 ›› 2019, Vol. 35 ›› Issue (4): 325-327.DOI: 10.13701/j.cnki.kqyxyj.2019.04.005

3D 打印在口腔临床工作的应用

魏焱¹, 张晓欣^2*, 许胡笛¹

1. 武汉大学口腔医学院湖北武汉 430079;
2. 武汉大学口腔医院种植科湖北武汉 430079

收稿日期:2018-05-17 出版日期:2019-04-28 发布日期:2019-04-23
通讯作者: 张晓欣,E-mail: zhangxiaoxin@whu.edu.cn
作者简介:魏焱(1993~ ),男,湖北武汉人,硕士在读,主要从事口腔种植相关的临床研究。
基金资助:
国家自然科学基金(编号:81600906)

Application of 3D Printing in Oral Clinical Work

WEI Yan¹, ZHANG Xiao-xin^2*, XU Hu-di¹

1. School of Stomatology, Wuhan University, Wuhan 430079, China;
2. Department of Dental Implantology, School and Hospital of Stomatology, Wuhan University, Wuhan 430079, China

Received:2018-05-17 Online:2019-04-28 Published:2019-04-23

摘要/Abstract

摘要： 近年来,随着数字化技术和工程制造技术的发展,3D 打印已经成功地打印各种个性化支架材料,其中模型和手术导板已经成功应用于口腔临床工作,各种修复冠和种植体也逐步普及,使用生物相容性材料打印的骨移植物在口腔外科领域也发挥着重要作用。而引入了细胞、基质和生长因子等活性成分的3D 生物打印更是在在组织工程和再生领域展现了惊人的发展潜力。本文涵盖了3D 打印技术以及相关的最新研究进展,旨在将这种新型的治疗策略应用于临床实践中。

关键词: 3D打印, 3D生物打印, 口腔临床, 个性化, 组织再生

Abstract: In recent years, with the development of digital technology and engineering technology, 3D printing is successfully used to print a variety of personalized stents. For example, 3D print model and stent have been successfully used in the oral clinical work, and the restoration and implant are also popularized. The bone grafts printed with biocompatible materials also play an important role in oral surgery. In addition, 3D bioprinting with active ingredients, including cells, matrix, and growth factor, has shown remarkable development potential in tissue engineering and regeneration. This chapter covers 3D printing techniques and all recent research endeavors aiming to bring this novel therapeutic strategy to everyday clinical practice.

Key words: 3D printing, 3D bioprinting, Oral clinical, Personalization, Tissue regeneration

魏焱, 张晓欣, 许胡笛. 3D 打印在口腔临床工作的应用[J]. 口腔医学研究, 2019, 35(4): 325-327.

WEI Yan, ZHANG Xiao-xin, XU Hu-di. Application of 3D Printing in Oral Clinical Work[J]. Journal of Oral Science Research, 2019, 35(4): 325-327.

参考文献

[1] Azuma M, Yanagawa T, Ishibashi-Kanno N, et al. Mandibular reconstruction using plates prebent to fit rapid prototyping 3-dimensional printing models ameliorates contour deformity [J]. Head Face Med, 2014,10:45.
[2] Singhal AJ, Shetty V, Bhagavan KR, et al. Improved surgery planning using 3-D printing: a case study [J]. Indian J Surg, 2016, 78(2):100-104.
[3] van Assche N, van Steenberghe D, Quirynen M, et al. Accuracy assessment of computer-assisted flapless implant placement in partial edentulism [J]. J Clin Periodontol, 2010, 37(4):398-403.
[4] Mangano FG, Cirotti B, Sammons RL, et al. Custom-made, root-analogue direct laser metal forming implant: a case report [J]. Lasers Med Sci, 2012, 27(6):1241-1245.
[5] Lee WS, Lee DH, Lee KB. Evaluation of internal fit of interim crown fabricated with CAD/CAM milling and 3D printing system [J]. J Adv Prosthodont, 2017, 9(4):265-270.
[6] Cho SH, Chang WG. Mirror-image anterior crown fabrication with computer-aided design and rapid prototyping technology: a clinical report [J]. J Prosthet Dent, 2013, 109(2):75-78.
[7] Kanazawa M, Inokoshi M, Minakuchi S, et al. Trial of a CAD/CAM system for fabricating complete dentures [J]. Dent Mater J, 2011, 30(1):93-96.
[8] Wiechmann D, Rummel V, Thalheim A, et al. Customized brackets and archwires for lingual orthodontic treatment [J]. Am J Orthod Dentofacial Orthop, 2003, 124(5):593-599.
[9] Ackland DC, Robinson D, Redhead M, et al. A personalized 3D-printed prosthetic joint replacement for the human temporomandibular joint: From implant design to implantation [J]. J Mech Behav Biomed Mater, 2017, 69:404-411.
[10] Li J, Hsu Y, Luo E, et al. Computer-aided design and manufacturing and rapid prototyped nanoscale hydroxyapatite/polyamide (n-HA/PA) construction for condylar defect caused by mandibular angle ostectomy [J]. Aesthetic Plast Surg, 2011, 35(4):636-640.
[11] Sandor GK, Numminen J, Wolff J, et al. Adipose stem cells used to reconstruct 13 cases with cranio-maxillofacial hard-tissue defects [J]. Stem Cells Transl Med, 2014, 3(4):530-540.
[12] Reichert JC, Cipitria A, Epari DR, et al. A tissue engineering solution for segmental defect regeneration in load-bearing long bones [J]. Sci Transl Med, 2012, 4(141):141r-193r.
[13] Rees A, Powell LC, Chinga-Carrasco G, et al. 3D bioprinting of carboxymethylated-periodate oxidized nanocellulose constructs for wound dressing applications [J]. Biomed Res Int, 2015,2015:925757.
[14] Rasperini G, Pilipchuk SP, Flanagan CL, et al. 3D-printed bioresorbable scaffold for periodontal repair [J]. J Dent Res, 2015, 94(9 Suppl):153S-157S.
[15] Dan H, Vaquette C, Fisher AG, et al. The influence of cellular source on periodontal regeneration using calcium phosphate coated polycaprolactone scaffold supported cell sheets [J]. Biomaterials, 2014, 35(1):113-122.
[16] Kim K, Lee CH, Kim BK, et al. Anatomically shaped tooth and periodontal regeneration by cell homing [J]. J Dent Res, 2010, 89(8):842-847.
[17] Athirasala A, Tahayeri A, Thrivikraman G, et al. A dentin-derived hydrogel bioink for 3D bioprinting of cell laden scaffolds for regenerative dentistry [J]. Biofabrication, 2018, 10(2):24101.
[18] Sakai VT, Zhang Z, Dong Z, et al. SHED differentiate into functional odontoblasts and endothelium [J]. J Dent Res, 2010, 89(8):791-796.
[19] Pringle S, Maimets M, van der Zwaag M, et al. Human salivary gland stem cells functionally restore radiation damaged salivary glands [J]. Stem Cells, 2016,34(3):640-652.
[20] Pepper ME, Seshadri V, Burg TC, et al. Characterizing the effects of cell settling on bioprinter output [J]. Biofabrication, 2012, 4(1):11001.

3D 打印在口腔临床工作的应用

Application of 3D Printing in Oral Clinical Work

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

[1]	朱肖雪, 赵苏峰, 杨旭东, 孙国文, 杨亚萍, 黄丽娟, 何凯. 计算机辅助设计联合3D打印应用于自体牙移植[J]. 口腔医学研究, 2021, 37(1): 76-80.
[2]	马文, 韦意, 陆琳, 付帅, 张长彬, 崔庆赢, 彭灿邦, 王立冬, 许艳华, 黎明. 多类型数字影像拟合及3D打印技术在髁突肿瘤中的运用[J]. 口腔医学研究, 2021, 37(1): 81-86.
[3]	段光远, 马超. 具有层纹的隐形正畸矫治器制作方法研究[J]. 口腔医学研究, 2020, 36(8): 723-725.
[4]	乔庚, 刘佳怡, 王媛, 汪振华. 3D打印制备不同重量比例的n-HA/PLA/PVA复合膜性能比较[J]. 口腔医学研究, 2020, 36(3): 280-286.
[5]	马璋玉, 张丛笑. 有抗菌能力的牙周引导组织再生膜的制备研究[J]. 口腔医学研究, 2020, 36(2): 126-130.
[6]	张睿, 郑丹, 孟柳燕. 牙周牙髓联合病变伴畸形根面沟治疗的临床疗效研究[J]. 口腔医学研究, 2020, 36(1): 56-60.
[7]	花超超, 张荣和. 3D打印在口腔正畸临床诊疗中的应用进展[J]. 口腔医学研究, 2019, 35(9): 833-836.
[8]	于文凤, 赵世俊, 吕敏敏, 崔凤林, 康梅珍, 张志媛. 浓缩生长因子在上颌前牙区引导骨再生术中的临床应用[J]. 口腔医学研究, 2019, 35(7): 676-680.
[9]	郭芳, 黄硕, 朱勇, 薛洋, 胡敏, 高悦榕, 刘昌奎. 3种不同工艺制备聚醚醚酮假体的生物力学性能研究[J]. 口腔医学研究, 2019, 35(4): 405-408.
[10]	麻健丰,林婷婷,黄盛斌. 3D打印技术在牙科陶瓷成型领域的研究进展[J]. 口腔医学研究, 2019, 35(2): 107-112.
[11]	梁燕, 马文, 聂焱, 付帅, 张长彬, 崔庆赢, 王立冬, 黎明. 3D打印塞治器在下颌骨囊性病变中的应用[J]. 口腔医学研究, 2019, 35(12): 1153-1156.
[12]	唐睿, 孙建伟, 李成华, 刘鑫. 一种新型3D打印正畸微小种植体导板[J]. 口腔医学研究, 2019, 35(12): 1157-1161.
[13]	季平, 杨生. 个性化钛网在口腔种植骨增量中的应用[J]. 口腔医学研究, 2019, 35(11): 1011-1015.
[14]	马文, 李燕妮, 王立冬, 梁燕, 黎明. 数字化导板在多生牙拔除术中的应用[J]. 口腔医学研究, 2019, 35(11): 1030-1034.
[15]	张楠, 刘庆, 刘娜, 常文晓, 康洁, 窦海瑞. 数字化印模对可摘局部义齿临床适合性的影响[J]. 口腔医学研究, 2019, 35(1): 67-70.