烧结次数对CAD/CAM可切削陶瓷修复体性能的影响

doi:10.13701/j.cnki.kqyxyj.2023.06.003

摘要/Abstract

摘要： 作为一种新兴的口腔修复技术,计算机辅助设计和计算机辅助制作(computer aided design and computer aided manufacture,CAD/CAM)因其高效、精确的优点,近年来被广泛应用于临床。尽管该修复技术拥有较高的临床成功率,其临床效果还是会受多种因素的影响。除机械和美学等自身性能因素外,材料的加工工艺也会影响其成功率。在加工生产过程中,不同环节会对修复体的性能产生不同程度的影响。临床实践中医生常常会因为改色、邻接等问题增加烧结次数,这使得切削后烧结成为关注点之一。本文针对烧结次数对CAD/CAM可切削材料修复体性能的影响做一综述,以期对技工及临床工作有所帮助。

关键词: 计算机辅助设计和计算机辅助制作, 陶瓷, 烧结次数, 性能

Abstract: Due to its high efficiency and accuracy, CAD/CAM, as a novel dental restoration technology, has been widely applied in clinics. Although this restoration technique exhibits high success rate, the results could still be affected by several factors, such as mechanical and aesthetic properties. In addition, the success rate could also be influenced by the processing technique of materials. In the production process, different steps may affect the restoration performance to various degrees. In clinical practice, the number of sintering may be changed from case to case for the purpose of color change and adjacency contact, which causes the post-cutting sintering to be a significant concern. In this paper, an extensive and comprehensive review is conducted on the effects of sintering times on the CAD/CAM machinable material restoration to summarize useful information to dental technicians as well as clinical work.

Key words: computer aided design and computer aided manufacture, ceramic, sintering times, performance

吴岩珠, 刘茜. 烧结次数对CAD/CAM可切削陶瓷修复体性能的影响[J]. 口腔医学研究, 2023, 39(6): 483-486.

WU Yanzhu, LIU Qian. Effects of Sintering Times on Properties of CAD/CAM Machinable Ceramic Restorations[J]. Journal of Oral Science Research, 2023, 39(6): 483-486.

参考文献

[1] 李洋阳,邹丽峰.CAD/CAM个性化瓷基台的研究现状[J].吉林医药学院学报,2020,41(5):377-381.
[2] Gracis S, Thompson VP, Ferencz JL, et al. A new classification system for all-ceramic and ceramic-like restorative materials [J]. Int J Prosthodont, 2015, 28(3):227-235.
[3] 张建民,苗芳.CAD/CAM全瓷修复技术在口腔临床中的应用进展[J].现代医药卫生,2015,31(18):2781-2784.
[4] 钱冬冬,张蕾,骆小平,等.反复烧结对牙科二硅酸锂玻璃陶瓷颜色和透光性的影响[J].华西口腔医学杂志,2015,33(1): 50-53.
[5] Gozneli R, Kazazoglu E, Ozkan Y. Flexural properties of leucite and lithium disilicate ceramic materials after repeated firings [J]. J Dent Sci, 2014, 9(2):144-150.
[6] ØIlo M, Gjerdet NR, Tvinnereim HM. The firing procedure influences properties of a zirconia core ceramic [J]. Dent Mater, 2008, 24(4):471-475.
[7] Tang X, Luo H, Bai Y, et al. Influences of multiple firings and aging on surface roughness, strength and hardness of veneering ceramics for zirconia frameworks [J]. J Dent, 2015, 43(9):1148-1153.
[8] Alkurt M, Duymus ZY, Gundogdu M. Effects of multiple firings on the microstructure of zirconia and veneering ceramics [J]. Dent Mater J, 2016, 35(5):776-781.
[9] Meng H, Xie H, Yang L, et al. Effects of multiple firings on mechanical properties and resin bonding of lithium disilicate glass-ceramic [J]. J Mech Behav Biomed Mater, 2018, 88:362-369.
[10] Hanawa T. Zirconia versus titanium in dentistry: A review [J]. Dent Mater J, 2020, 39(1):24-36.
[11] Yoshinari M. Future prospects of zirconia for oral implants-A review [J]. Dent Mater J, 2020, 39(1):37-45.
[12] 黎敏,华成舸,蒋丽.提高氧化锆陶瓷粘接性能新技术的研究进展[J].国际口腔医学杂志,2021,48(4):485-490.
[13] 万乾炳.口腔氧化锆修复材料分代之我见[J].国际口腔医学杂志,2021,48(2):125-128.
[14] 田正宇,王剑.超透氧化锆修复体的临床应用现状[J].中国现代医学杂志,2020,30(2):60-65.
[15] Hensel J, Reise M, Liebermann A, et al. Impact of multiple firings on fracture load of veneered zirconia restorations[J]. J Mech Behav Biomed Mater, 2022, 130: 105213.
[16] Vichi A, Sedda M, Bonadeo G, et al. Effect of repeated firings on flexural strength of veneered zirconia [J]. Dent Mater, 2015, 31(8):e151-e156.
[17] Moon W, Park JH, Lee HA, et al. Influence of additive firing on the surface characteristics, Streptococcus mutans viability and optical properties of zirconia [J]. Materials (Basel), 2021, 14(5): 1286.
[18] Ozturk O, Uludag B, Usumez A, et al. The effect of ceramic thickness and number of firings on the color of two all-ceramic systems [J]. J Prosthet Dent, 2008, 100(2):99-106.
[19] Chila BV, Ajay AM. The effect of ceramic thickness and number of firings on the color of a zirconium oxide based all ceramic system fabricated using CAD/CAM technology [J]. J Adv Prosthodont, 2011, 3(2):57-62.
[20] 史也,吴效民.氧化锆全瓷修复体颜色再现的影响因素[J].口腔颌面修复学杂志,2014,15(3):179-182.
[21] 伊元夫,王晨,田杰谟,等.牙科着色氧化钇稳定四方多晶氧化锆陶瓷的制备及颜色性能[J].华西口腔医学杂志,2008,26(5):556-559.
[22] 何虹,李聪聪,夏昕雨,等.口腔医学领域的材料学应用与新进展[J].全科口腔医学杂志(电子版),2019,6(30):64-68.
[23] 夏玉宏,徐飞,陈蕾,等.氧化锆表面不同处理方式对锆瓷与饰瓷结合强度的影响[J].中南大学学报(医学版),2019,44(1):53-58.
[24] Trindade FZ, Amaral M, Melo RM, et al. Zirconia-porcelain bonding: effect of multiple firings on microtensile bond strength [J]. J Adhes Dent, 2013, 15(5):467-472.
[25] 邓斌,伊元夫,温宁,等.多次烧结对氧化锆-饰面瓷结合强度的影响[J].硅酸盐通报,2009,28(S1):58-61.
[26] Oğuz Ei, üzgür ME, Sungur S, et al. Impact of multiple firings and resin cement type on shear bond strength between zirconia and resin cements [J]. J Adv Prosthodont, 2020, 12(4):197-203.
[27] 高士军,裴鹏飞,卢薇,等.饰瓷温度烧结对氧化锆陶瓷与树脂黏结剂剪切强度的影响[J].中国组织工程研究,2013,17(51):8809-8814.
[28] Fu L, Engqvist H, Xia W. Glass-ceramics in dentistry: A review [J]. Materials (Basel), 2020, 13(5):1049.
[29] 郑梓婷,闫文娟.椅旁CAD/CAM可切削材料相关性能的研究进展[J].口腔材料器械杂志,2019,28(3):46-51.
[30] Li R, Chow TW, Matinlinna JP. Ceramic dental biomaterials and CAD/CAM technology: State of the art [J]. J Prosthodont Res, 2014, 58(4):208-216.
[31] 谷莉玲,郭永锦,程辉,等.多次烧结对二硅酸锂陶瓷后牙贴面疲劳性能的影响[J].上海口腔医学,2020,29(6):586-590.
[32] 邹蕾,邹得平,张梦娜,等.不同烧结工艺对椅旁CAD/CAM IPS e.max CAD二硅酸锂玻璃陶瓷挠曲强度的影响[J].医疗装备,2020,33(5):6-9.
[33] Campanelli de Morais D, de Oliveira Abu-Izze F, Rivoli Rossi N, et al. Effect of consecutive firings on the optical and mechanical properties of silicate and lithium disilicate based glass-ceramics [J]. J Prosthodont, 2021, 30(9):776-782.
[34] 郝爽,熊成立,李娴静,等.不同表面处理及冷热循环对CAD/CAM材料表面粗糙度和光学性能的影响[J].口腔颌面修复学杂志,2020,21(2):97-102.
[35] 李水根,庞莉苹,姚江武.烧结次数对牙科全瓷开放性总孔体积、透明度和色度的影响[J].华西口腔医学杂志,2012,30(4):417-419+424.
[36] 孟玉坤,巢永烈,廖运茂.反复烧烤对渗透陶瓷-面瓷复合体颜色的影响[J].实用口腔医学杂志,2003,19(2):132-135.
[37] Nejatidanesh F, Azadbakht K, Savabi O, et al. Effect of repeated firing on the translucency of CAD-CAM monolithic glass-ceramics [J]. J Prosthet Dent, 2020, 123(3): 530.e1-530.e6.
[38] 陈文利,骆小平.多次烧结对二硅酸锂玻璃陶瓷颜色和透光性的影响[J].口腔材料器械杂志,2015,24(3):118-122.
[39] Lee SY, Nathanson D, Giordano R. Colour stability of a new light-cured ceramic stain system subjected to glazing temperature [J]. J Oral Rehabil, 2010, 28(5):457-462.
[40] Yuan K, Wang F, Gao J, et al. Effect of zircon-based tricolor pigments on the color, microstructure, flexural strength and translucency of a novel dental lithium disilicate glass-ceramic [J]. J Biomed Mater Res B Appl Biomater, 2013, 102(1):98-107.
[41] Miranda JS, Barcellos ASP, MartinelliLobo CM, et al. Effect of staining and repeated firing on the surface and optical properties of lithium disilicate [J]. J Esthet Restor Dent, 2020, 32(1):113-118.
[42] Guarda GB, Correr AB, Gonçalves LS, et al. Effects of surface treatments, thermocycling, and cyclic loading on the bond strength of a resin cement bonded to a lithium disilicate glass ceramic [J]. Oper Dent, 2013, 38(2):208-217.
[43] Romanini-Junior JC, Kumagai RY, Ortega LF, et al. Adhesive/silane application effects on bond strength durability to a lithium disilicate ceramic [J]. J Esthet Restor Dent, 2018, 30(4):346-351.