静态数字咬合记录精度的研究进展

doi:10.13701/j.cnki.kqyxyj.2026.05.001

摘要/Abstract

摘要： 随着口腔数字化技术的蓬勃发展,精确获取患者的上下颌关系成为制定和实施修复计划的先决条件。尽管传统咬合记录方法已相对完善,但仍存在操作复杂、椅旁时间长、患者舒适度差等不足。静态数字咬合记录在一定程度上能改善这些不足,但其精度、影响因素等仍需进一步研究。本文对静态数字咬合记录的获取方法及其精度的影响因素和评价方法进行综述,以期为静态数字咬合记录的临床应用提供参考依据。

关键词: 数字咬合记录, 精度, 影响因素, 评价方法

Abstract: With the boom in digital dentistry, accurate acquisition of the patient's maxillomandibular relationship has become a prerequisite for formulating and implementing restorative plans. Although conventional occlusal records are relatively well-established, they still have limitations such as complex procedures, prolonged chairside time, and poor patient comfort. Static virtual interocclusal record can partially mitigate these deficiencies, but its accuracy and influencing factors still require further investigation. This article reviews the recording methods of static virtual interocclusal record, as well as the factors influencing its accuracy and the evaluation methods, aiming to provide a reference for their clinical application.

Key words: virtual interocclusal record, accuracy, influencing factors, evaluation methods

石淑琪, 李风兰. 静态数字咬合记录精度的研究进展[J]. 口腔医学研究, 2026, 42(5): 363-367.

SHI Shuqi, LI Fenglan. Progress on Accuracy of Static Virtual Interocclusal Record[J]. Journal of Oral Science Research, 2026, 42(5): 363-367.

参考文献

[1] Chinam N, Bekkali M, Kallas M, et al. Virtual occlusal records acquired by using intraoral scanners: A review of factors that influence maxillo-mandibular relationship accuracy [J]. J Prosthodont, 2023, 32(S2): 192-207.
[2] Shadid R, Sadaqah N. Accuracy of virtual static articulation: A systematic review [J]. Int J Prosthodont, 2022, 35(5): 627-646.
[3] Paul P, Banerjee TN, Banerjee S, et al. Evaluation of efficacy of digital or virtual bite registration over conventional techniques-A systematic review [J]. J Oral Biol Craniofac Res, 2024, 14(6): 785-792.
[4] 中国标准化研究院,中国科学院数学与系统科学研究院,辽宁出入境检验检疫局,等.测量方法与结果的准确度(正确度与精密度)第1部分:总则与定义[Z].中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会. 2004: 24.
[5] Iwauchi Y, Tanaka S, Kamimura-Sugimura E, et al. Clinical evaluation of the precision of interocclusal registration by using digital and conventional techniques [J]. J Prosthet Dent, 2022, 128(4): 611-617.
[6] Ries JM, Grünler C, Wichmann M, et al. Three-dimensional analysis of the accuracy of conventional and completely digital interocclusal registration methods [J]. J Prosthet Dent, 2022, 128(5): 994-1000.
[7] Zheng Y, Zhang T, Liu Y, et al. Evaluation methods and influencing factors on accuracy for static virtual articulation obtained by intraoral scanners: A critical review of the literature [J]. J Esthet Restor Dent, 2025, 37(2): 378-399.
[8] Revilla-León M, Barmak AB, Tohme H, et al. Factors that influence the accuracy of maxillomandibular relationship at maximum intercuspation acquired by using intraoral scanners: A systematic review [J]. J Dent, 2023, 138: 104718.
[9] 王思谕,周哲青,袁泉,等.3种口内扫描仪用于咬合关系记录的准确度研究[J].华西口腔医学杂志,2024,42(2): 227-233.
[10] Hennen MV, Blum H, Dammaschke T. Accuracy and reproducibility of the visualization of occlusal contact points using analog articulating foil or digital intraoral scanners in vitro [J]. Int J Comput Dent, 2022, 25(2): 173-180.
[11] Lee YC, Kim JE, Nam NE, et al. Influence of edentulous conditions on intraoral scanning accuracy of virtual interocclusal record in quadrant scan [J]. Appl Sci(Basel), 2021, 11(4):1489.
[12] Tian J, Jung RE, Han Y, et al. The impact of mandibular partial edentulous distal extension on virtual occlusal record accuracy when using two different intraoral scanners: An in vitro analysis [J]. J Dent, 2024, 150: 105303.
[13] Edher F, Hannam AG, Tobias DL, et al. The accuracy of virtual interocclusal registration during intraoral scanning [J]. J Prosthet Dent, 2018, 120(6): 904-912.
[14] Morsy N, El Kateb M. In vivo precision of digital static interocclusal registration for full arch and quadrant arch scans: a randomized controlled clinical trial [J]. BMC Oral Health, 2022, 22(1): 559.
[15] Revilla-León M, Gómez-Polo M, Barmak AB, et al. Influence of scan extension on the accuracy of maximum intercuspal position recorded by using intraoral scanners or an artificial intelligence-based program [J]. J Prosthet Dent, 2025, 134(6):2524-2533.
[16] Solaberrieta E, Arias A, Brizuela A, et al. Determining the requirements, section quantity, and dimension of the virtual occlusal record [J]. J Prosthet Dent, 2016, 115(1): 52-56.
[17] Revilla-León M, Alonso Pérez-Barquero J, Zubizarreta-Macho Á, et al. Influence of the number of teeth and location of the virtual occlusal record on the accuracy of the maxillo-mandibular relationship obtained by using an intraoral scanner [J]. J Prosthodont, 2023, 32(3): 253-258.
[18] Garikano X, Amezua X, Iturrate M, et al. Evaluation of repeatability of different alignment methods to obtain digital interocclusal records: An in vitro study [J]. J Prosthet Dent, 2024, 131(4): 709-717.
[19] Chen H, Yang X, Li L, et al. Morphological design of occlusal wear facets for the mandibular first molar crown using different bite registration methods [J]. J Prosthodont, 2023, 32(5): 439-444.
[20] Li L, Chen H, Wang Y, et al. Construction of virtual intercuspal occlusion: Considering tooth displacement [J]. J Oral Rehabil, 2021, 48(6): 701-710.
[21] Revilla-León M, Gómez-Polo M, Barmak AB, et al. Accuracy of an artificial intelligence-based program for locating the maxillomandibular relationship of scans acquired by using intraoral scanners [J]. J Prosthet Dent, 2025, 134(3):809-817.
[22] Revilla-León M, Ntovas P, Barmak AB, et al. Influence of edentulous areas on the accuracy of the maximum intercuspal position recorded by using different intraoral scanners or an artificial intelligence-based program [J]. J Prosthet Dent, 2025, 134(6):2534-2542.
[23] Ren S, Morton D, Lin WS. Accuracy of virtual interocclusal records for partially edentulous patients [J]. J Prosthet Dent, 2020, 123(6): 860-865.
[24] Morsy N, El Kateb M. Accuracy of intraoral scanners for static virtual articulation: A systematic review and meta-analysis of multiple outcomes [J]. J Prosthet Dent, 2024, 132(3): 546-552.
[25] Essam Y, El Kateb M, Morsy N. Accuracy of virtual articulation in maximal intercuspal position in direct and indirect digital workflows for fixed partial denture fabrication [J]. J Prosthodont, 2025, 34(5): 540-544.
[26] Iwaki Y, Wakabayashi N, Igarashi Y. Dimensional accuracy of optical bite registration in single and multiple unit restorations [J]. Oper Dent, 2013, 38(3): 309-315.
[27] Tu Y, Zhao X, Zhao G, et al. Assessment of physiological posterior-tooth displacement under habitual occlusal force by intraoral scanning using implant-supported crowns as the reference [J]. J Prosthet Dent, 2025, 133(5): 1260-1267.
[28] You R, Han F, Sun Z, et al. Evaluation of intraoral optical scanning accuracy for fine structure reconstruction and occlusal records of inlay/onlay preparations [J]. Int J Comput Dent, 2022, 25(3): 257-265.
[29] Okamoto M, Tanabe N, Fukazawa S, et al. Accuracy of optical interocclusal registration using an intraoral scanner [J]. J Prosthodont Res, 2023, 67(4): 619-625.
[30] Jeong Y, Shim JS, Kim JH, et al. Accuracy of bite registration using intraoral scanner based on data trimming strategy for fremitus teeth [J]. J Kor Dent Sci, 2022, 15(1): 61-67.
[31] Revilla-León M, Gómez-Polo M, Zeitler J M, et al. Does the available interocclusal space influence the accuracy of the maxillomandibular relationship captured with an intraoral scanner? [J]. J Prosthet Dent, 2024, 132(2): 435-440.
[32] Revilla-León M, Gohil A, Barmak AB, et al. Influence of ambient temperature changes on intraoral scanning accuracy [J]. J Prosthet Dent, 2023, 130(5): 755-760.
[33] Agustín-Panadero R, Estada MIC, Alonso Pérez-Barquero J, et al. Effect of relative humidity on the accuracy, scanning time, and number of photograms of dentate complete arch intraoral digital scans [J]. J Prosthet Dent, 2025, 133(3): 865-871.
[34] Revilla-León M, Kois DE, Kois JC. A guide for maximizing the accuracy of intraoral digital scans. Part 1: Operator factors [J]. J Esthet Restor Dent, 2023, 35(1): 230-240.
[35] Cha C, Pyo SW, Chang JS, et al. Digital mounting accuracy of 2 intraoral scanners with a single anterior or bilateral posterior occlusal scan: A three-dimensional analysis [J]. J Prosthet Dent, 2023, 130(4): 612.e1-612.e8.
[36] Revilla-León M, Gómez-Polo M, Barmak AB, et al. Influence of occlusal collision corrections completed by two intraoral scanners or a dental design program on the accuracy of the maxillomandibular relationship [J]. J Prosthet Dent, 2024, 132(1): 191-203.
[37] 田杰华,梅雨芃,黄驿茗,等.不同配准方式对多牙缺失种植修复虚拟记录精度的影响[J].中华口腔医学杂志,2025,60(3): 254-261.
[38] Wong KY, Esguerra RJ, Chia VAP, et al. Three-dimensional accuracy of digital static interocclusal registration by three intraoral scanner systems [J]. J Prosthodont, 2018, 27(2): 120-128.
[39] 王行康,张丽,姜涛.4种口内扫描仪在不同颊侧扫描范围的咬合接触面积比较[J].医药前言,2023,13(27): 11-16.
[40] Fraile C, Ferreiroa A, Romeo M, et al. Clinical study comparing the accuracy of interocclusal records, digitally obtained by three different devices [J]. Clin Oral Investig, 2022, 26(2): 1957-1962.
[41] Beck F, Lettner S, Zupancic Cepic L, et al. Comparison of virtual intersection and occlusal contacts between intraoral and laboratory scans: An in-vivo study [J]. J Clin Med, 2023, 12(3):996.
[42] Wang Q, Zhao Z, Zhou M, et al. In vivo evaluation of the reliability and validity of three digital occlusion analysis methods [J]. J Dent, 2022, 127: 104355.
[43] Morsy N, Hammad I. Recording maximal intercuspation and border positions of the mandible with intraoral scanner using the acquisition software's multi-occlusion function [J]. J Adv Prosthodont, 2024, 16(4): 221-230.