计算机辅助规划设计助力精准种植与长期稳定

doi:10.13701/j.cnki.kqyxyj.2021.09.001

口腔医学研究 ›› 2021, Vol. 37 ›› Issue (9): 775-779.DOI: 10.13701/j.cnki.kqyxyj.2021.09.001

• 特约述评 • 下一篇

计算机辅助规划设计助力精准种植与长期稳定

柳忠豪^*

滨州医学院附属烟台市口腔医院口腔种植科山东烟台 264000

收稿日期:2021-06-09 出版日期:2021-09-28 发布日期:2021-09-16
通讯作者: *柳忠豪,E-mail:dentlzh@163.com
作者简介:柳忠豪教授,口腔医学博士,滨州医学院附属烟台口腔医院院长,博士生导师,中国牙防基金会副理事长、国际口腔种植学会(ITI)中国分会study club主管、中国卫生产业协会精准医疗分会口腔医疗组副组长,中华口腔医学会口腔种植专业委员会常务委员、口腔医学教育专业委员会委员、计算机专业委员会委员,国际牙医师学院(ICD)院士,山东省口腔医学会副会长、口腔医学美学专业委员会主任委员、口腔种植专业委员会候任主任委员、口腔医学教育专业委员会副主任委员,《口腔医学研究》副主编,《中国口腔医学继续教育杂志》编委,烟台市口腔医学会会长。从事口腔种植临床工作近30年,擅长各种骨增量外科技术、即刻种植、全口种植修复、微创种植技术、计算机辅助设计引导牙种植术等各种临床种植技术,多次主办国家级(中华级)口腔医学继续教育项目,培训学员数千人次,发表学术论文80余篇,参编著作十余部,主持参与科研课题十余项,培养硕士研究生三十余名。

Accurate Implantation and Long-term Stability with the Assistance of Computer-aided Design

LIU Zhonghao^*

Department of Implant Dentistry, Yantai Stomatological Hospital Affiliated to Binzhou Medical Universtiy, Yantai 264000, China

Received:2021-06-09 Online:2021-09-28 Published:2021-09-16

摘要/Abstract

摘要： 随着影像技术及计算机技术的不断发展,口腔种植医疗也正经历一场数字化革命,发展为包括数字化信息采集、计算机辅助虚拟三维种植手术规划、数字化引导种植外科和数字化修复等多种数字化技术在内的综合诊疗方式,数字化的临床程序使得种植诊疗更加规范、种植修复实施更加精准,必将极大降低了种植修复并发症的发生,提升种植修复长期稳定的功能与美学效果。笔者将围绕数字化信息采集、种植修复前美学分析、种植外科辅助规划、种植体支持的修复体设计等计算机辅助种植规划与设计方面进行概述。

关键词: 牙种植, 计算机辅助设计, 数字化技术, 美学分析设计

Abstract: With the constant development of radiation and computer technology, the field of implant dentistry is also experiencing a digital revolution, including digitalized data acquisition, computer-aided virtual planning, computer-guided implant surgery and restoration, etc. The digitalized clinical protocol promotes a more standardized and accurate dental implant treatment, which certainly will reduce the occurrence of complications for dental implant treatment, and achieve a more predictable long-term stability in both function and aesthetics. In this paper, we summarized the digital collection, digital smile design, computer-guided surgery planning, and implant supported prosthesis design in combined with the development status of digital technique, and the future trend.

Key words: dental implant, computer-aided design, digital technique, digital smile design

柳忠豪. 计算机辅助规划设计助力精准种植与长期稳定[J]. 口腔医学研究, 2021, 37(9): 775-779.

LIU Zhonghao. Accurate Implantation and Long-term Stability with the Assistance of Computer-aided Design[J]. Journal of Oral Science Research, 2021, 37(9): 775-779.

参考文献

[1] 柳忠豪,申晓靖,周文娟.数字化种植的研究进展及发展趋势[J].口腔医学研究,2019,35(8):725-729.
[2] Marghalani A, Weber HP, Finkelman M, et al. Digital versus conventional implant impressions for partially edentulous arches: An evaluation of accuracy [J]. J Prosthet Dent, 2018, 119 (4):574-579.
[3] Lepidi L, Galli M, Grammatica A, et al. Indirect digital workflow for virtual cross-mounting of fixed implant-supported prostheses to create a 3D virtual patient[J]. J Prosthodont, 2021, 30 (2):177-182.
[4] Zheng F, Chee WW. Stereographic analog application in implant-supported complete rehabilitation: A dental technique[J]. J Prosthet Dent, 2020, 124 (1):14-18.
[5] Jankelson B, Swain CW, Crane PF, et al. Kinesiometric instrumentation: a new technology[J]. J Am Dent Assoc, 1975, 90(4): 834-840.
[6] Wismeijer D, Joda T, Flügge T, et al. Group 5 ITI Consensus Report: Digital technologies[J]. Clin Oral Implants Res, 2018, 29 Suppl 16:436-442.
[7] Kim RJ, Benic GI, Park JM. Trueness of digital intraoral impression in reproducing multiple implant position[J]. PLoS One, 2019, 14(11): e0222070.
[8] Kim KR, Seo KY, Kim S. Conventional open-tray impression versus intraoral digital scan for implant-level complete-arch impression[J]. J Prosthet Dent, 2019, 122(6):543-549.
[9] Wellens HLL, Hoskens H, Claes P, et al. Three-dimensional facial capture using a custom-built photogrammetry setup: Design, performance, and cost[J]. Am J Orthod Dentofacial Orthop, 2020, 158(2):286-299.
[10] Lane C, Harrell W Jr. Completing the 3-dimensional picture[J]. Am J Orthod Dentofacial Orthop, 2008, 133(4):612-620.
[11] Petrides G, Clark JR, Low H, et al. Three-dimensional scanners for soft-tissue facial assessment in clinical practice[J]. J Plast Reconstr Aesthet Surg, 2021, 74(3):605-614.
[12] Weinberg SM, Kolar JC. Three-dimensional surface imaging: limitations and considerations from the anthropometric perspective[J]. J Craniofac Surg, 2005, 16(5):847-851.
[13] Bush K. Antonyshyn O. Three-dimensional facial anthropometry using a laser surface scanner: validation of the technique[J]. Plast Reconstr Surg, 1996, 98(2):226-235.
[14] Meadows DM, Johnson WO, Allen JB. Generation of surface contours by moire patterns [J]. Appl Opt, 1970, 9(4):942-947.
[15] Artopoulos A, Buytaert JA, Dirckx JJ, et al. Comparison of the accuracy of digital stereophotogrammetry and projection moiréprofilometry for three-dimensional imaging of the face[J]. Int J Oral Maxillofac Surg, 2014, 43(5):654-662.
[16] Deli R, Galantucci LM, Laino A, et al. Three-dimensional methodology for photogrammetric acquisition of the soft tissues of the face: a new clinical-instrumental protocol[J]. Prog Orthod, 2013, 14:32.
[17] Lübbers HT, Medinger L, Kruse A, et al. Precision and accuracy of the 3dMD photogrammetric system in craniomaxillofacial application[J]. J Craniofac Surg, 2010, 21(3):763-767.
[18] Tzou CH, Artner NM, Pona I, et al. Comparison of three-dimensional surface-imaging systems[J]. J Plast Reconstr Aesthet Surg, 2014, 67(4):489-497.
[19] Hicks ST, Wood DP. Recording condylar movement with two facebow systems[J]. Angle Orthod, 1996, 66(4):293-300.
[20] Hobo S, Mochizuki S. A kinematic investigation of mandibular border movement by means of an electronic measuring system. PartⅠ: Development of the measuring system[J]. J Prosthet Dent, 1983, 50(3):368-373.
[21] Hobo S. A kinematic investigation of mandibular border movement by means of an electronic measuring system. Part Ⅲ: Rotational center of lateral movement[J]. J Prosthet Dent, 1984, 52(1):66-72.
[22] Cordray FE. Articulated dental cast analysis of asymptomatic and symptomatic populations[J]. Int J Oral Sci, 2016, 8(2):126-132.
[23] 宋蓉,林乐勋.数字化微笑设计技术在口腔美学教学中的实施[J].中国继续医学教育,2020,12(4):54-56.
[24] Meereis CT, de Souza GB, Albino LG, et al. Digital smile design for computer-assisted esthetic rehabilitation: two-year follow-up[J]. Oper Dent, 2016, 41(1):E13-E22.
[25] 马艺菡,周文娟,柳忠豪.数字化微笑设计在美学区种植修复的临床应用[J].中国口腔种植学杂志,2020,25(3):146-149.
[26] Mora MA, Chenin DL, Arce RM. Software tools and surgical guides in dental-implant-guided surgery[J]. Dent Clin North Am, 2014, 58(3):597-626.
[27] Cristache CM, Gurbanescu S. Accuracy evaluation of a stereolithographic surgical template for dental implant insertion using 3D superimposition protocol[J].Int J Dent, 2017, 2017:4292081.
[28] Lops D, Meneghello R, Sbricoli L, et al. Precision of the connection between implant and standard or computer-aided design/computer-aided manufacturing abutments: a novel evaluation method[J]. Int J Oral Maxillofac Implants, 2018, 33(1):23-30.
[29] Sumi T, Braian M, Shimada A, et al. Characteristics of implant-CAD/CAM abutment connections of two different internal connection systems[J]. J Oral Rehabil, 2012, 39(5):391-398.
[30] Hamed MT, Abdullah Mously H, Khalid Alamoudi S, et al. A systematic review of screw versus cement-retained fixed implant supported reconstructions[J]. Clin Cosmet Investig Dent, 2020, 12:9-16.
[31] 郭吕华.数字化口腔修复工艺图解[M].北京:人民卫生出版社,2018.
[32] Jia P, Yang J, Yue Z, et al. Comparison of peri-implant submucosal microbiota in arches with zirconia or titanium implant-supported fixed complete dental prostheses: a study protocol for a randomized controlled trial[J]. Trials, 2020, 21(1):979.
[33] Storelli S, Del Fabbro M. Implant supported cantilevered fixed dental rehabilitations in partially edentulous patients: Systematic review of the literature. Part I[J]. Clin Oral Implants Res, 2018, 29 Suppl 18:253-274.

计算机辅助规划设计助力精准种植与长期稳定

Accurate Implantation and Long-term Stability with the Assistance of Computer-aided Design

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

[1]	贾胜男, 林野. 不同的种植修复方式对无牙颌剩余牙槽骨改建的影响[J]. 口腔医学研究, 2021, 37(7): 598-601.
[2]	管其帅, 许贺, 于甜甜, 许胜, 周文娟, 柳忠豪. 缺牙间隙对美学区水平骨增量延期种植的临床效果影响研究[J]. 口腔医学研究, 2021, 37(7): 607-611.
[3]	王稚英. 数字化技术在牙槽骨严重骨量不足种植义齿修复中的应用[J]. 口腔医学研究, 2021, 37(6): 485-488.
[4]	陈欢欢, 朱莉, 宋逸婷, 蔡孟哲, 徐一迪, 黄盛斌, 麻健丰. 光固化成型ZTA全瓷冠的机械性能及精度研究[J]. 口腔医学研究, 2021, 37(6): 554-558.
[5]	余海纳, 孟维艳. 剩余骨高度<4 mm上颌窦经牙槽嵴提升不植骨的可行性研究[J]. 口腔医学研究, 2021, 37(5): 389-392.
[6]	陈姝江, 陈文川. 牙种植位点复合组织缺损增量时机与方式的选择[J]. 口腔医学研究, 2021, 37(5): 393-396.
[7]	罗有成, 赵健, 杨双, 吴哲. 不同粘接间隙对CAD/CAM PMMA暂时修复体固位力的影响[J]. 口腔医学研究, 2021, 37(4): 325-329.
[8]	李雅, 袁硕, 陈志宇, 李美康, 马晓平. 不同类型瓷贴面与树脂水门汀对贴面密合度与微渗漏的影响[J]. 口腔医学研究, 2021, 37(4): 330-334.
[9]	杨鑫, 范亚伟. 计算机辅助设计个性化开髓导板的研究[J]. 口腔医学研究, 2021, 37(3): 222-226.
[10]	徐涛, 李丽曼, 刘云松, 危伊萍, 胡文杰. 重度牙周炎磨牙拔除运用微翻瓣位点保存术后种植修复效果短期观察[J]. 口腔医学研究, 2021, 37(3): 264-268.
[11]	陈小冬, 陈济芬. 数字化口腔扫描系统临床应用研究进展[J]. 口腔医学研究, 2020, 36(7): 611-615.
[12]	周延民, 汪汉池. 种植义齿上部修复及其并发症[J]. 口腔医学研究, 2020, 36(5): 405-409.
[13]	乐柯, 董衡, 陈力, 杨光雯, 陈琳, 刘晖, 周娜, 牟永斌. 应用三维预成型钛网在上颌前牙区骨增量疗效的临床研究[J]. 口腔医学研究, 2020, 36(5): 481-485.
[14]	余科, 贺晓萍, 文才, 刘旭琳, 杨健. IL-6抑制剂控制种植体愈合期炎症性骨吸收的动物实验研究[J]. 口腔医学研究, 2020, 36(3): 251-254.
[15]	贾胜男, 邸萍, 林野. “All-on-4”种植即刻固定修复后下颌骨生物学改建模式的影像学研究[J]. 口腔医学研究, 2020, 36(10): 957-961.