陶瓷髓腔固位冠修复根管治疗后牙的研究进展

doi:10.13701/j.cnki.kqyxyj.2018.05.003

口腔医学研究 ›› 2018, Vol. 34 ›› Issue (5): 470-473.DOI: 10.13701/j.cnki.kqyxyj.2018.05.003

陶瓷髓腔固位冠修复根管治疗后牙的研究进展

陆俊卿, 张修银^*

上海交通大学医学院附属第九人民医院口腔修复科,上海市口腔医学重点实验室/上海市口腔医学研究所,国家口腔疾病临床研究中心上海 200011

收稿日期:2017-07-27 出版日期:2018-05-28 发布日期:2018-05-29
通讯作者: 张修银,E-mail: xiuyinzhangxyz@163. com
作者简介:陆俊卿(1991~ ),男,浙江武义人,硕士在读,主要从事口腔全瓷固定修复相关研究。
基金资助:
国家自然科学基金(编号:81070857)

Research Progress of Glass Ceramics Endocrowns Reconstructing Endodontically Treated Posterior Teeth.

LU Jun-qing, ZHANG Xiu-yin^*

Department of Prosthetics, Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai Key Laboratory of Stomatology & Shanghai Research Institute of Stomatology, National Clinical Research Center of Stomatology, Shanghai 200011, China

Received:2017-07-27 Online:2018-05-28 Published:2018-05-29

摘要/Abstract

摘要： 根管治疗(root canal treatment,RCT)后大面积硬组织缺损后牙修复仍然是一个临床难题。随着材料发展和数字化技术普及,髓腔固位冠(endocrown)结合高强度陶瓷材料,计算机辅助设计与制造(computer-aided design/manufacturing,CAD/CAM)以及可靠的粘接材料,由于其微创、美观、便捷等优点受到患者和修复医生的青睐。本文就后牙髓腔固位冠与桩核冠比较修复材料、对接设计、适合性研究、纤维加强型树脂应用、预后研究等进展作一综述。

关键词: 美学修复, 髓腔固位冠, 陶瓷, 计算机辅助设计与制造

Abstract: Restoration of endodontically treated posterior teeth with extensive coronal loss is still a clinical problem. With the development of dentistry material and widely employment of computer-aided design/manufacturing (CAD/CAM), endocrowns combined with high-strength glass ceramics, CAD/CAM, and reliable adhesive systems are widely accepted by both patients and prosthodontists for their minimal invasion and esthetic characteristics. This paper reviews the research progress on the comparison between endocrowns and conventional restoration, marginal preparation design, adaptation of endocrowns,ceramic materials,application of FRCs, and prognostic evaluation.

Key words: Esthetic prosthodontics, Endocrown, Ceramic, Computer-aided design/manufacturing

陆俊卿, 张修银. 陶瓷髓腔固位冠修复根管治疗后牙的研究进展[J]. 口腔医学研究, 2018, 34(5): 470-473.

LU Jun-qing, ZHANG Xiu-yin. Research Progress of Glass Ceramics Endocrowns Reconstructing Endodontically Treated Posterior Teeth.[J]. Journal of Oral Science Research, 2018, 34(5): 470-473.

参考文献

[1] Pissis P. Fabrication of a metal-free ceramic restoration utilizing the monobloc technique [J]. Pract Periodontics Aesthet Dent, 1995, 7(5)∶83-94
[2] Bindl A, Mörmann WH. Clinical evaluation of adhesively placed Cerec endo-crowns after 2 years--preliminary results [J]. J Adhes Dent, 1999, 1(3)∶255-265
[3] 田宇,张亚庆,吕海鹏,等.后牙椅旁CAD/CAM修复洞型分类的思考[J].牙体牙髓牙周病学杂志,2016,26(10)∶581-588
[4] Biacchi GR, Basting RT. Comparison of fracture strength of endocrowns and glass fiber post-retained conventional crowns [J]. Oper Dent, 2012, 37(2)∶130-136
[5] Pedrollo LD, Van EA, De MJ, et al. Biomechanical behavior of endodontically treated premolars using different preparation designs and CAD/CAM materials [J]. J Dent, 2017, 59∶54-61
[6] Chang CY, Kuo JS, Lin YS, et al. Fracture resistance and failure modes of CEREC endo-crowns and conventional post and core-supported CEREC crowns [J]. J Dent Sci, 2009, 4(3)∶110-117
[7] Dejak B, Motkowski A. 3D-Finite element analysis of molars restored with endocrowns and posts during masticatory simulation [J]. Dent Mater, 2013, 29(12)∶e309-e317
[8] Lin CL, Chang YH, Pai CA. Evaluation of failure risks in ceramic restorations for endodontically treated premolar with MOD preparation [J]. Dent Mater, 2011, 27(5)∶431-438
[9] Aktas G, Yerlikaya H, Akca K. Mechanical failure of endocrowns manufactured with different ceramic materials: an in vitro biomechanical study [J]. J Prosthodont, 2018, 27(4):340-346
[10] Zhu J, Rong Q, Wang X, et al. Influence of remaining tooth structure and restorative material type on stress distribution in endodontically treated maxillary premolars: A finite element analysis [J]. J Prosthet Dent, 2017, 117(5)∶646-655
[11] El-Damanhoury HM, Haj-Ali RN, Platt JA. Fracture resistance and microleakage of endocrowns utilizing three CAD-CAM blocks [J]. Oper Dent, 2015, 40(2)∶201-210
[12] Gresnigt MM, Özcan M, van den Houten ML, et al. Fracture strength, failure type and Weibull characteristics of lithium disilicate and multiphase resin composite endocrowns under axial and lateral forces [J]. Dent Mater, 2016, 32(5)∶607-614
[13] 郭靖,王潇宇,李学盛,等.不同边缘设计的髓腔固位冠修复下颌前磨牙的应力分析[J].南方医科大学学报,2016,36(2)∶200-204
[14] 王慧媛,付强,张春光,等.边缘形式对大面积缺损第一磨牙髓腔固位冠应力分布的影响[J].口腔医学研究,2015,31(11)∶1121-1124
[15] Shin Y, Park S, Park JW, et al. Evaluation of the marginal and internal discrepancies of CAD/CAM endocrowns with different cavity depths: An in vitro study [J]. J Prosthet Dent, 2017, 117(1)∶109-115
[16] Gaintantzopoulou MD, El-Damanhoury HM. Effect of preparation depth on the marginal and internal adaptation of computer-aided design/computer-assisted manufacture endocrowns [J]. Oper Dent, 2016, 41(6)∶607-616
[17] Rocca GT, Rizcalla N, Krejci I. Fiber-reinforced resin coating for endocrown preparations: A technical report [J]. Oper Dent, 2013, 38(3)∶242-248
[18] Belleflamme MM, Geerts SO, Louwette MM, et al. No post-no core approach to restore severely damaged posterior teeth: An up to 10-year retrospective study of documented endocrown cases [J]. J Dent, 2017, 63∶1-7
[19] Sedrez-Porto JA, Rosa WL, da Silva AF, et al. Endocrown restorations: A systematic review and meta-analysis [J]. J Dent, 2016, 52∶8-14

陶瓷髓腔固位冠修复根管治疗后牙的研究进展

Research Progress of Glass Ceramics Endocrowns Reconstructing Endodontically Treated Posterior Teeth.

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

[1]	何林, 何淞, 吴稀, 杨森. 人根尖乳头干细胞在羟基磷灰石和聚多巴胺-羟基磷灰石上的粘附、增殖及成骨分化[J]. 口腔医学研究, 2020, 36(6): 523-527.
[2]	高楠, 韦羽和, 姜潇, 路炜. 染色和遮色处理对氧化锆与树脂粘接性能的影响[J]. 口腔医学研究, 2020, 36(6): 595-598.
[3]	王美艳, 赵婵媛, 王杨洋, 王熙. 不同抛光处理对两种氧化锆陶瓷表面粗糙度和细菌粘附性能的影响[J]. 口腔医学研究, 2020, 36(3): 239-242.
[4]	李茜茜, 康婷, 陈燕语, 宋丹阳, 郭玲. 上颌中切牙斜形折裂修复设计的有限元分析[J]. 口腔医学研究, 2020, 36(3): 259-263.
[5]	赵军, 樊洪. 不同核饰瓷厚度对CAD/CAM玻璃陶瓷材料透明性的影响[J]. 口腔医学研究, 2020, 36(3): 273-275.
[6]	郭馨蔚, 赵洪岩, 程博群, 钱鑫, 张志民. 耐氟变形链球菌对计算机辅助设计与制造陶瓷与牙体组织粘接的影响[J]. 口腔医学研究, 2019, 35(8): 752-756.
[7]	尹路, 郑燕芬. 预备与不预备前牙超薄瓷贴面断裂模式的比较研究[J]. 口腔医学研究, 2019, 35(4): 382-385.
[8]	麻健丰,林婷婷,黄盛斌. 3D打印技术在牙科陶瓷成型领域的研究进展[J]. 口腔医学研究, 2019, 35(2): 107-112.
[9]	康婷, 石思琼, 赵威, 郑睿, 李茜茜, 解静, 郭玲. 上颌第一前磨牙舌尖斜形折裂不同修复设计的有限元分析[J]. 口腔医学研究, 2019, 35(10): 953-956.
[10]	赵楚翘, 徐一驰, 刘定坤, 杨军星, 魏子清, 唐林俊, 沈杰, 刘宇昆, 刘志辉. 髓腔固位冠及桩核冠修复下颌第一磨牙大面积缺损的生物力学分析[J]. 口腔医学研究, 2018, 34(5): 513-517.
[11]	冯靓婧, 于皓, 程辉. 烧结次数对不同方法染色的氧化锆陶瓷粘接性能的影响[J]. 口腔医学研究, 2018, 34(2): 172-175.
[12]	陈温霞, 林捷. 陶瓷还是复合树脂？CAD/CAM树脂基陶瓷材料的研究进展[J]. 口腔医学研究, 2018, 34(10): 1042-1044.
[13]	陈智, 陈瑞甜. 髓腔固位冠[J]. 口腔医学研究, 2018, 34(1): 1-5.
[14]	吴帆, 曹谅, 姜晓南, 赵阿莉, 张国庆, 王利民, 王卫国. 下颌第一磨牙邻面不同高度缺损髓腔固位冠的生物力学分析[J]. 口腔医学研究, 2018, 34(1): 65-68.
[15]	陈俊驰, 郭玲. 上中切牙龈缘高度不对称的相关美学参数研究[J]. 口腔医学研究, 2018, 34(1): 82-86.