[1] Rachman A, Rantam FA, Bachtiar I, et al. Biocompatibility of yttria-tetragonal zirconia polycrystal seeded with human adipose derived mesenchymal stem cell[J]. Acta Inform Med,2018,26(4):249-253. [2] Sun T, Guo M, Cheng Y, et al.Graded nano glass-zirconia material for dental applications-Part Ⅱ biocompatibility evaluation[J]. J Biomed Nanotechnol,2017,13(12):1682-1693. [3] Nakazawa K, Nakamura K, Harada A, et al.Surface properties of dental zirconia ceramics affected by ultrasonic scaling and low-temperature degradation[J].PLoS One,2018,13(9):e0203849. [4] Viitaniemi L, Abdulmajeed A, Sulaiman T,et al.Adhesion and early colonization of S. Mutans on lithium disilicate reinforced glass-ceramics, monolithic zirconia and dual cure resin cement[J]. Eur J Prosthodont Restor Dent,2017,25(4):228-234. [5] Wassmann T, Kreis S, Behr M, et al. The influence of surface texture and wettability on initial bacterial adhesion on titanium and zirconium oxide dental implants[J].Int J Implant Dent,2017,3(1):32. [6] Bock RM, Marin E, Rondinella A, et al. Development of a SiYAlON glaze for improved osteoconductivity of implantable medical devices[J]. J Biomed Mater Res B Appl Biomater,2018,106(3):1084-1096. [7] Zucuni CP, Guilardi LF, Rippe MP, et al. Polishing of ground Y-TZP ceramic is mandatory for improving the mechanical behavior[J]. Braz Dent J,2018,29(5):483-491. [8] 陈吉华,魏静静,王富,等.不同表面处理对全瓷材料表面粗糙度及表面自由能的影响[J]. 现代生物医学进展, 2015, 15(24):4635-4639. [9] 张晓, 姬洋,刘宝盈,等.不同抛光工具对氧化锆抛光效果的比较研究[J]. 口腔医学研究, 2018, 34(11):1240-1243. [10] 李文晶,李天舒,骆雪,等.口腔陶瓷修复体调磨后表面处理方法研究进展[J].中国实用口腔科杂志, 2018,11(1):57-60. [11] 王桃,郭震威,郭慧晶,等. 不同抛光工具对CEREC Blocs陶瓷抛光效果的比较研究[J].华西口腔医学杂志, 2017,35(2):171-175. [12] 李斯文,李施施,王艳红,等.不同表面处理方法对氧化锆陶瓷微观结构和粘接强度影响的研究[J].华西口腔医学杂志, 2017,35(1):43-50. |