Application of 3D Printing in Oral Clinical Work

doi:10.13701/j.cnki.kqyxyj.2019.04.005

Abstract

Abstract: In recent years, with the development of digital technology and engineering technology, 3D printing is successfully used to print a variety of personalized stents. For example, 3D print model and stent have been successfully used in the oral clinical work, and the restoration and implant are also popularized. The bone grafts printed with biocompatible materials also play an important role in oral surgery. In addition, 3D bioprinting with active ingredients, including cells, matrix, and growth factor, has shown remarkable development potential in tissue engineering and regeneration. This chapter covers 3D printing techniques and all recent research endeavors aiming to bring this novel therapeutic strategy to everyday clinical practice.

Key words: 3D printing, 3D bioprinting, Oral clinical, Personalization, Tissue regeneration

WEI Yan, ZHANG Xiao-xin, XU Hu-di. Application of 3D Printing in Oral Clinical Work[J]. Journal of Oral Science Research, 2019, 35(4): 325-327.

References

[1] Azuma M, Yanagawa T, Ishibashi-Kanno N, et al. Mandibular reconstruction using plates prebent to fit rapid prototyping 3-dimensional printing models ameliorates contour deformity [J]. Head Face Med, 2014,10:45.
[2] Singhal AJ, Shetty V, Bhagavan KR, et al. Improved surgery planning using 3-D printing: a case study [J]. Indian J Surg, 2016, 78(2):100-104.
[3] van Assche N, van Steenberghe D, Quirynen M, et al. Accuracy assessment of computer-assisted flapless implant placement in partial edentulism [J]. J Clin Periodontol, 2010, 37(4):398-403.
[4] Mangano FG, Cirotti B, Sammons RL, et al. Custom-made, root-analogue direct laser metal forming implant: a case report [J]. Lasers Med Sci, 2012, 27(6):1241-1245.
[5] Lee WS, Lee DH, Lee KB. Evaluation of internal fit of interim crown fabricated with CAD/CAM milling and 3D printing system [J]. J Adv Prosthodont, 2017, 9(4):265-270.
[6] Cho SH, Chang WG. Mirror-image anterior crown fabrication with computer-aided design and rapid prototyping technology: a clinical report [J]. J Prosthet Dent, 2013, 109(2):75-78.
[7] Kanazawa M, Inokoshi M, Minakuchi S, et al. Trial of a CAD/CAM system for fabricating complete dentures [J]. Dent Mater J, 2011, 30(1):93-96.
[8] Wiechmann D, Rummel V, Thalheim A, et al. Customized brackets and archwires for lingual orthodontic treatment [J]. Am J Orthod Dentofacial Orthop, 2003, 124(5):593-599.
[9] Ackland DC, Robinson D, Redhead M, et al. A personalized 3D-printed prosthetic joint replacement for the human temporomandibular joint: From implant design to implantation [J]. J Mech Behav Biomed Mater, 2017, 69:404-411.
[10] Li J, Hsu Y, Luo E, et al. Computer-aided design and manufacturing and rapid prototyped nanoscale hydroxyapatite/polyamide (n-HA/PA) construction for condylar defect caused by mandibular angle ostectomy [J]. Aesthetic Plast Surg, 2011, 35(4):636-640.
[11] Sandor GK, Numminen J, Wolff J, et al. Adipose stem cells used to reconstruct 13 cases with cranio-maxillofacial hard-tissue defects [J]. Stem Cells Transl Med, 2014, 3(4):530-540.
[12] Reichert JC, Cipitria A, Epari DR, et al. A tissue engineering solution for segmental defect regeneration in load-bearing long bones [J]. Sci Transl Med, 2012, 4(141):141r-193r.
[13] Rees A, Powell LC, Chinga-Carrasco G, et al. 3D bioprinting of carboxymethylated-periodate oxidized nanocellulose constructs for wound dressing applications [J]. Biomed Res Int, 2015,2015:925757.
[14] Rasperini G, Pilipchuk SP, Flanagan CL, et al. 3D-printed bioresorbable scaffold for periodontal repair [J]. J Dent Res, 2015, 94(9 Suppl):153S-157S.
[15] Dan H, Vaquette C, Fisher AG, et al. The influence of cellular source on periodontal regeneration using calcium phosphate coated polycaprolactone scaffold supported cell sheets [J]. Biomaterials, 2014, 35(1):113-122.
[16] Kim K, Lee CH, Kim BK, et al. Anatomically shaped tooth and periodontal regeneration by cell homing [J]. J Dent Res, 2010, 89(8):842-847.
[17] Athirasala A, Tahayeri A, Thrivikraman G, et al. A dentin-derived hydrogel bioink for 3D bioprinting of cell laden scaffolds for regenerative dentistry [J]. Biofabrication, 2018, 10(2):24101.
[18] Sakai VT, Zhang Z, Dong Z, et al. SHED differentiate into functional odontoblasts and endothelium [J]. J Dent Res, 2010, 89(8):791-796.
[19] Pringle S, Maimets M, van der Zwaag M, et al. Human salivary gland stem cells functionally restore radiation damaged salivary glands [J]. Stem Cells, 2016,34(3):640-652.
[20] Pepper ME, Seshadri V, Burg TC, et al. Characterizing the effects of cell settling on bioprinter output [J]. Biofabrication, 2012, 4(1):11001.