Development of β-type Medical Titanium Alloys’ Performance

doi:10.13701/j.cnki.kqyxyj.2020.06.001

Abstract

Abstract: Compared with traditional α-type medical titanium alloy, β-type medical titanium alloys have been widely applied as implants and maxillofacial bone repairing implants because of their no biotoxicity, good biocompatibility, excellent degradable behavior, and mechanical properties close to the human natural bone. The present paper summarized the development of β-type medical titanium alloys applied in stomatology based on their preparation and deformation technology, mechanical properties, corrosion resistance, biocompatibility, and so on.

Key words: β-type medical titanium alloys, oral implants, biocompatibility, young’s modulus, corrosion resistance

LIU Jianguo, ZHOU Hongbo. Development of β-type Medical Titanium Alloys’ Performance[J]. Journal of Oral Science Research, 2020, 36(6): 501-508.

References

[1] 于婉琦,周延民,赵静辉.口腔种植体新材料的研究现状[J].国际口腔医学杂志,2019,46(4): 488-496.
[2] 魏芬绒,王海,金旭丹,等.生物医用钛合金材料及其应用 [J].世界有色金属,2018,494(2): 271-273.
[3] 张文毓.低弹性模量钛合金的研究与应用 [J].船舶物资与市场,2019,(12): 11-16.
[4] Leyens C, Peters M. Titanium and titanium alloys: fundamentals and applications [M]. Weinheim: Wiley-VCH, 2003: 4.
[5] Banerjee D, Williams JC. Perspectives on titanium science and technology [J]. Acta Materialia, 2013, 61(3): 844-879.
[6] Li P, Jia Y, Wang Y, et al. Effect of Fe addition on microstructure and mechanical properties of as-cast Ti49Ni51 alloy [J]. Materials (Basel), 2019, 12(19): 3114.
[7] Im YD, Lee YK. Effects of Mo concentration on recrystallization texture, deformation mechanism and mechanical properties of Ti-Mo binary alloys [J]. J Alloy Compd, 2019, 821: 153508.
[8] 赵丹妹.由EBM和SLM制备的钛合金材料的安全性能评价[D]. 中国食品药品检定研究院, 2017.
[9] Weinmann M, Schnitter C, Stenzel M, et al. Development of bio-compatible refractory Ti/Nb(/Ta) alloys for application in patient-specific orthopaedic implants [J]. Int J Refract Metals Hard Mater, 2018, 75: 126-136.
[10] 刘欣,张卫平.基于电子束熔融技术的椎间融合器金属骨小梁结构单元的研究[J]. 生命科学仪器, 2014, 12(6): 16-20.
[11] Surmeneva MA, Koptyug A, Khrapov D, et al. In situ synthesis of a binary Ti-10at% Nb alloy by electron beam melting using a mixture of elemental niobium and titanium powders [J]. Journal of Materials Processing Technology, 2020, 282: 116646.
[12] Rabadia C, Liu Y, Cao GH, et al. High-strength β stabilized Ti-Nb-Fe-Cr alloys with large plasticity [J]. Mater Sci Eng A Struct Mater, 2018, 732: 368-377.
[13] Yemisci I, Mutlu O, Gulsoy N, et al. Experimentation and analysis of powder injection molded Ti10Nb10Zr alloy: a promising candidate for electrochemical and biomedical application [J]. Journal of Materials Research and Technology, 2019, 8(6): 5233-5245.
[14] Zhang YS, Hu JJ, Zhang W, et al. Discontinuous core-shell structured Ti-25Nb-3Mo-3Zr-2Sn alloy with high strength and good plasticity [J]. Materials Characterization, 2019, 147: 127-130.
[15] Zhang L, Tan J, He Z, et al. Effect of calcium pyrophosphate on microstructural evolution and in vitro biocompatibility of Ti-35Nb-7Zr composite by spark plasma sintering [J]. Mater Sci Eng C Mater Biol Appl, 2018, 90: 8-15.
[16] 戴世娟,朱运田,陈锋.新型医用β钛合金研究的发展现状及加工方法 [J]. 重庆理工大学学报(自然科学), 2016, 30(4): 27-34.
[17] Kuczyńska-Zemła D, Kijeńska-Gawrońska E, Chlanda A, et al. Biological properties of a novel β-Ti alloy with a low young’s modulus subjected to cold rolling [J]. Appl Surf Sci, 2020, 511: 145523.
[18] 孙润根,张德闯,林建国.高压固溶处理对β钛合金微观结构与弹性模量的影响 [J]. 湘潭大学自然科学学报, 2018, 40(4): 7-10.
[19] Ozan S, Lin J, Li Y, et al. Deformation mechanism and mechanical properties of a thermomechanically processed β Ti-28Nb-35.4Zr alloy [J]. J Mech Behav Biomed Mater, 2018, 78: 224-234.
[20] 许艳飞,文璟,肖逸锋,等.双级时效对Ti-25Nb-10Ta-1Zr-0.2Fe医用β钛合金显微组织与力学性能的影响 [J]. 中国有色金属学报, 2016, 26(9): 1912-1918.
[21] Kyong MK, Hee YK, Shuichi M. Effect of Zr content on phase stability, deformation behavior, and Young's modulus in Ti-Nb-Zr alloys [J]. Materials, 2020, 13(2): 476.
[22] Chen S, Wu J, Tu J, et al. Enhanced plasticity in a Ti-Ni-Nb-Zr shape memory bulk metallic glass composite with high Nb addition [J]. Mater Sci Eng A Struct Mater, 2017, 704: 192-198.
[23] Jiang B, Wang Q, Wen D, et al. Effects of Nb and Zr on structural stabilities of Ti-Mo-Sn-based alloys with low modulus [J]. Mater Sci Eng A Struct Mater, 2017, 687: 1-7.
[24] Shiraishi T, Yubuta K, Shishido T, et al. Elastic properties of as-solidified Ti-Zr binary alloys for biomedical applications [J]. Materials Transactions, 2016, 57(12): 1986-1992.
[25] Yang K, Wang J, Tang H, et al. Additive manufacturing of in-situ reinforced Ti-35Nb-5Ta-7Zr (TNTZ) alloy by selective electron beam melting (SEBM) [J]. J Alloys Compd, 2020, 826: 154178.
[26] 郭顺,郑琦,张俊松,等.低弹性模量亚稳β型Ti-38Nb合金的微观组织与力学行为 [J].稀有金属,2015,39(9): 769-774.
[27] 沈睿,陈锋,余新泉,等.氧含量对Ti-35Nb-3.7Zr-1.3Mo-xO合金组织与力学性能的影响 [J].东南大学学报:自然科学版,2015,45(3): 478-483.
[28] Nunes AR, Borborema S, Araújo LS, et al. Influence of thermo-mechanical processing on structure and mechanical properties of a new metastable β Ti-29Nb-2Mo-6Zr alloy with low Young’s modulus [J]. J Alloys Compd, 2020, 820: 153078.
[29] Lee T, Lee S, Kim I, et al. Breaking the limit of Young’s modulus in low-cost Ti-Nb-Zr alloy for biomedical implant applications [J]. J Alloys Compd, 2020, 828: 154401.
[30] Fojt J, Joska L, Malek J, et al. Corrosion behavior of Ti-39Nb alloy for dentistry [J]. Mater Sci Eng C Mater Biol Appl, 2015, 56: 532-537.
[31] Jawed SF, Rabadia CD, Liu Y, et al. Strengthening mechanism and corrosion resistance of beta-type Ti-Nb-Zr-Mn alloys [J]. Mater Sci Eng C Mater Biol Appl, 2020, 110: 110728.
[32] Kumar GL, Chinara S, Das S, et al. Studies on Ti-29Nb-13Ta-4.6Zr alloy for use as a prospective biomaterial [J]. Materials Today: Proceedings, 2019, 15: 11-20.
[33] 温科,李风兰.近β钛合金TLM表面双层辉光等离子渗氮及其腐蚀性能研究 [J]. 真空科学与技术学报, 2016, 36(2): 193-198.
[34] Raducanu D, Vasilescu E, Cojocaru VD, et al. Mechanical and corrosion resistance of a new nanostructured Ti-Zr-Ta-Nb alloy [J]. J Mech Behav Biomed Mater, 2011, 4(7): 1421-1430.
[35] Gill P, Munroe N, Pulletikurthi C, et al. Effect of manufacturing process on the biocompatibility and mechanical properties of Ti-30Ta alloy [J]. J Mater Eng Perform, 2011, 20(4): 819-823.
[36] Zhang Y, Chu K, He S, et al. Fabrication of high strength, antibacterial and biocompatible Ti-5Mo-5Ag alloy for medical and surgical implant applications [J]. Mater Sci Eng C Mater Biol Appl, 2020, 106: 110165.
[37] De Andrade DP, De Vasconcellos LM, Carvalho IC, et al. Titanium-35niobium alloy as a potential material for biomedical implants: In vitro study [J]. Mater Sci Eng C Mater Biol Appl, 2015, 56: 538-544.
[38] 段永刚,丁英奇,张龙,等.新型β钛合金Ti35Nb3Zr2Ta在人工关节假体应用中的生物相容性 [J].中国组织工程研究,2015,19(34): 5536-5540.
[39] 孙钰.新型低弹性模量钛合金TiNbZrTaSi生物相容性及骨整合能力实验研究[D].吉林大学, 2016.
[40] Meng X, Wang X, Guo Y, et al. Biocompatibility evaluation of a newly developed Ti-Nb-Zr-Ta-Si alloy implant [J]. J Biomater Tissue Eng, 2016, 6(11): 861-869.
[41] Zhang Y, Guo T, Li Q, et al. Novel ultrafine-grained β-type Ti-28Nb-2Zr-8Sn alloy for biomedical applications [J]. J Biomed Mater Res A, 2019, 107(8): 1628-1639.
[42] Wang Y, Wen C, Hodgson P, et al. Biocompatibility of TiO₂ nanotubes with different topographies [J]. J Biomed Mater Res A, 2014, 102(3): 743-751.
[43] Qadir MB, Lin J, Biesiekierski A, et al. Effect of anodized TiO₂-Nb₂O₅-ZrO₂ nanotubes with different nanoscale dimensions on the biocompatibility of a Ti35Zr28Nb alloy [J]. ACS Appl Mater Interfaces, 2020, 12(5): 6776-6787.
[44] Hu J, Zhong X, Fu X. Enhanced bone remodeling effects of low-modulus Ti-5Zr-3Sn-5Mo-25Nb alloy implanted in the mandible of beagle dogs under delayed loading[J]. ACS Omega, 2019, 4(20): 18653-18662.
[45] Lario J, Amigo A, Segovia F, et al. Surface modification of Ti-35Nb-10Ta-1.5Fe by the double acid-etching process [J]. Materials (Basel), 2018, 11(4): 494.
[46] Gu H, Ding Z, Yang Z, et al. Microstructure evolution and electrochemical properties of TiO₂/Ti-35Nb-2Ta-3Zr micro/nano-composites fabricated by friction stir processing [J]. Mater Des, 2019, 169: 107680.
[47] Wu H, Xie L, He M, et al. A wear-resistant TiO nanoceramic coating on titanium implants for visible-light photocatalytic removal of organic residues [J]. Acta Biomater, 2019, 97: 597-607.
[48] Kheradmandfard M, Kashani-Bozorg SF, Lee JS, et al. Significant improvement in cell adhesion and wear resistance of biomedical β-type titanium alloy through ultrasonic nanocrystal surface modification [J]. J Alloys Compd, 2018, 762: 941-949.