Accurate Implantation and Long-term Stability with the Assistance of Computer-aided Design

doi:10.13701/j.cnki.kqyxyj.2021.09.001

Abstract

Abstract: With the constant development of radiation and computer technology, the field of implant dentistry is also experiencing a digital revolution, including digitalized data acquisition, computer-aided virtual planning, computer-guided implant surgery and restoration, etc. The digitalized clinical protocol promotes a more standardized and accurate dental implant treatment, which certainly will reduce the occurrence of complications for dental implant treatment, and achieve a more predictable long-term stability in both function and aesthetics. In this paper, we summarized the digital collection, digital smile design, computer-guided surgery planning, and implant supported prosthesis design in combined with the development status of digital technique, and the future trend.

Key words: dental implant, computer-aided design, digital technique, digital smile design

LIU Zhonghao. Accurate Implantation and Long-term Stability with the Assistance of Computer-aided Design[J]. Journal of Oral Science Research, 2021, 37(9): 775-779.

References

[1] 柳忠豪,申晓靖,周文娟.数字化种植的研究进展及发展趋势[J].口腔医学研究,2019,35(8):725-729.
[2] Marghalani A, Weber HP, Finkelman M, et al. Digital versus conventional implant impressions for partially edentulous arches: An evaluation of accuracy [J]. J Prosthet Dent, 2018, 119 (4):574-579.
[3] Lepidi L, Galli M, Grammatica A, et al. Indirect digital workflow for virtual cross-mounting of fixed implant-supported prostheses to create a 3D virtual patient[J]. J Prosthodont, 2021, 30 (2):177-182.
[4] Zheng F, Chee WW. Stereographic analog application in implant-supported complete rehabilitation: A dental technique[J]. J Prosthet Dent, 2020, 124 (1):14-18.
[5] Jankelson B, Swain CW, Crane PF, et al. Kinesiometric instrumentation: a new technology[J]. J Am Dent Assoc, 1975, 90(4): 834-840.
[6] Wismeijer D, Joda T, Flügge T, et al. Group 5 ITI Consensus Report: Digital technologies[J]. Clin Oral Implants Res, 2018, 29 Suppl 16:436-442.
[7] Kim RJ, Benic GI, Park JM. Trueness of digital intraoral impression in reproducing multiple implant position[J]. PLoS One, 2019, 14(11): e0222070.
[8] Kim KR, Seo KY, Kim S. Conventional open-tray impression versus intraoral digital scan for implant-level complete-arch impression[J]. J Prosthet Dent, 2019, 122(6):543-549.
[9] Wellens HLL, Hoskens H, Claes P, et al. Three-dimensional facial capture using a custom-built photogrammetry setup: Design, performance, and cost[J]. Am J Orthod Dentofacial Orthop, 2020, 158(2):286-299.
[10] Lane C, Harrell W Jr. Completing the 3-dimensional picture[J]. Am J Orthod Dentofacial Orthop, 2008, 133(4):612-620.
[11] Petrides G, Clark JR, Low H, et al. Three-dimensional scanners for soft-tissue facial assessment in clinical practice[J]. J Plast Reconstr Aesthet Surg, 2021, 74(3):605-614.
[12] Weinberg SM, Kolar JC. Three-dimensional surface imaging: limitations and considerations from the anthropometric perspective[J]. J Craniofac Surg, 2005, 16(5):847-851.
[13] Bush K. Antonyshyn O. Three-dimensional facial anthropometry using a laser surface scanner: validation of the technique[J]. Plast Reconstr Surg, 1996, 98(2):226-235.
[14] Meadows DM, Johnson WO, Allen JB. Generation of surface contours by moire patterns [J]. Appl Opt, 1970, 9(4):942-947.
[15] Artopoulos A, Buytaert JA, Dirckx JJ, et al. Comparison of the accuracy of digital stereophotogrammetry and projection moiréprofilometry for three-dimensional imaging of the face[J]. Int J Oral Maxillofac Surg, 2014, 43(5):654-662.
[16] Deli R, Galantucci LM, Laino A, et al. Three-dimensional methodology for photogrammetric acquisition of the soft tissues of the face: a new clinical-instrumental protocol[J]. Prog Orthod, 2013, 14:32.
[17] Lübbers HT, Medinger L, Kruse A, et al. Precision and accuracy of the 3dMD photogrammetric system in craniomaxillofacial application[J]. J Craniofac Surg, 2010, 21(3):763-767.
[18] Tzou CH, Artner NM, Pona I, et al. Comparison of three-dimensional surface-imaging systems[J]. J Plast Reconstr Aesthet Surg, 2014, 67(4):489-497.
[19] Hicks ST, Wood DP. Recording condylar movement with two facebow systems[J]. Angle Orthod, 1996, 66(4):293-300.
[20] Hobo S, Mochizuki S. A kinematic investigation of mandibular border movement by means of an electronic measuring system. PartⅠ: Development of the measuring system[J]. J Prosthet Dent, 1983, 50(3):368-373.
[21] Hobo S. A kinematic investigation of mandibular border movement by means of an electronic measuring system. Part Ⅲ: Rotational center of lateral movement[J]. J Prosthet Dent, 1984, 52(1):66-72.
[22] Cordray FE. Articulated dental cast analysis of asymptomatic and symptomatic populations[J]. Int J Oral Sci, 2016, 8(2):126-132.
[23] 宋蓉,林乐勋.数字化微笑设计技术在口腔美学教学中的实施[J].中国继续医学教育,2020,12(4):54-56.
[24] Meereis CT, de Souza GB, Albino LG, et al. Digital smile design for computer-assisted esthetic rehabilitation: two-year follow-up[J]. Oper Dent, 2016, 41(1):E13-E22.
[25] 马艺菡,周文娟,柳忠豪.数字化微笑设计在美学区种植修复的临床应用[J].中国口腔种植学杂志,2020,25(3):146-149.
[26] Mora MA, Chenin DL, Arce RM. Software tools and surgical guides in dental-implant-guided surgery[J]. Dent Clin North Am, 2014, 58(3):597-626.
[27] Cristache CM, Gurbanescu S. Accuracy evaluation of a stereolithographic surgical template for dental implant insertion using 3D superimposition protocol[J].Int J Dent, 2017, 2017:4292081.
[28] Lops D, Meneghello R, Sbricoli L, et al. Precision of the connection between implant and standard or computer-aided design/computer-aided manufacturing abutments: a novel evaluation method[J]. Int J Oral Maxillofac Implants, 2018, 33(1):23-30.
[29] Sumi T, Braian M, Shimada A, et al. Characteristics of implant-CAD/CAM abutment connections of two different internal connection systems[J]. J Oral Rehabil, 2012, 39(5):391-398.
[30] Hamed MT, Abdullah Mously H, Khalid Alamoudi S, et al. A systematic review of screw versus cement-retained fixed implant supported reconstructions[J]. Clin Cosmet Investig Dent, 2020, 12:9-16.
[31] 郭吕华.数字化口腔修复工艺图解[M].北京:人民卫生出版社,2018.
[32] Jia P, Yang J, Yue Z, et al. Comparison of peri-implant submucosal microbiota in arches with zirconia or titanium implant-supported fixed complete dental prostheses: a study protocol for a randomized controlled trial[J]. Trials, 2020, 21(1):979.
[33] Storelli S, Del Fabbro M. Implant supported cantilevered fixed dental rehabilitations in partially edentulous patients: Systematic review of the literature. Part I[J]. Clin Oral Implants Res, 2018, 29 Suppl 18:253-274.