Do IT and ISQ Reflect  Primary Stability of Dental Implants？

doi:10.13701/j.cnki.kqyxyj.2017.02.008

Abstract

Abstract: Objective: To analyze whether IT and ISQ can reflect dental implants primary stability. Methods: Twenty-four implants were inserted in 24 cow ribs, and the set torque and ISQ values were measured. After abutment and all-ceramic crown were placed, horizontal and vertical force were loaded until the micromotion reached 150μm and the force values were recorded. Results: In each group, both IT and ISQ had no significant correlation with implants primary stability (P＞0.05). While in the same sample, IT and ISQ may have significant correlation with implant's primary stability. Conclusion: IT and ISQ can reflect dental implants primary stability under certain condition.

Key words: Implants, Insertion torque, Implant stability quotient, Micromotions , Primary stability

CLC Number:

R782.12

PANG Qin,WANG Chao,MA Xiao-juan, DU Quan-gao, WU Ting-ting, FU Gang. Do IT and ISQ Reflect Primary Stability of Dental Implants？[J]. Journal of Oral Science Research, 2017, 33(2): 150-153.

References

[1] Winter W, Klein D, Karl M. Micromotion of Dental Implants: Basic Mechanical Considerations[J]. J Med Eng, 2013, 2013∶265412
[2] Favre P, Henderson AD. Prediction of stemless humeral implant micromotion during upper limb activities[J].Clin Biochem, 2016, 36(1)∶46-51
[3] Atieh MA, Alsabeeha NH, Payne A G. Can resonance frequency analysis predict failure risk of immediately loaded implants [J]. Int J Prosthodont, 2012, 25(4)∶326-339
[4] Paolo T,Teocrito C,Macro C,et al. Implant Stability Quotient(ISQ) vs dierect in vitro measurement of primary stability (micromotion):effect of bone density and insertion torque[J]. J Osteol Biomat,2010,1(1)∶141-151
[5] Brizuelavelasco A, lvarezArenal , Gilmur F J, et al. Relationship Between Insertion Torque and Resonance Frequency Measurements, Performed by Resonance Frequency Analysis, in Micromobility of Dental Implants: An In Vitro Study[J]. Implant Dent, 2015, 24(5)∶607-611
[6] Trisi P, Berardi D, Paolantonio M, et al. Primary stability, insertion torque, and bone density of conical implants with internal hexagon: is there a relationship [J]. J Craniofac Surg, 2013, 24(3)∶841-844
[7] 邵现红, 王钰莹, 朱汤梅,等.种植体扭矩与初级稳定性相关性的研究[J]. 现代口腔医学杂志,2014(2)∶69-71
[8] Marco D, Giuseppe D, Adriano P. Implants inserted with low insertion torque values for intraoral welded full-arch prosthesis: 1-year follow-up [J]. Clin Implant Dent Relat Res, 2012, 14 Suppl 1(1)∶39-45
[9] Gómez-Polo M, Ortega R, Gómez-Polo C, et al. Does Length, Diameter, or Bone Quality Affect Primary and Secondary Stability in Self-Tapping Dental Implants [J]. J Oral Maxillofac Surg, 2016, 74(7)∶1344-1353
[10] Torroella-Saura G, Mareque-Bueno J, Cabratosa-Termes J, et al. Effect of implant design in immediate loading. A randomized, controlled, split-mouth, prospective clinical trial [J]. Clin Oral Implants Res,2015,26(3)∶240-244
[11] Takeshi T, Hideaki T, Yasunori A, et al. Primary Stability of a Hybrid Implant Compared with Tapered and Cylindrical Implants in an Ex Vivo Model [J]. Clin Implant Dent Relat Res, 2015, 17(5)∶950-956
[12] Bayarchimeg D, Namgoong H, Kim B K, et al. Evaluation of the correlation between insertion torque and primary stability of dental implants using a block bone test [J]. J Periodontal Implant Sci, 2013, 43(1)∶30-36
[13] 游嘉,周乐峰,彭伟,等.面向即刻种植的种植体的初期稳定性研究[J].中国生物医学工程学报,2016,35(3)∶324-329
[14] Howashi M, Tsukiyama Y, Ayukawa Y, et al. Relationship between the CT Value and Cortical Bone Thickness at Implant Recipient Sites and Primary Implant Stability with Comparison of Different Implant Types [J]. Clin Implant Dent Relat Res, 2014,18(1)∶107-116
[15] Mathieu V, Vayron R, Richard G, et al. Biomechanical determinants of the stability of dental implants: Influence of the bone-implant interface properties [J]. J Biomech, 2014, 47(1)∶3-13
[16] Wang S, Liu G R, Hoang K C, et al. Identifiable range of osseointegration of dental implants through resonance frequency analysis [J]. Med Eng Phys, 2010, 32(10)∶1094-1106
[17] 韩雪莲,刘宗伟,李岩涛.种植牙即刻负重的生物力学的三维有限元分析[J].华西口腔医学杂志,2011,29(2)∶121-124
[18] Li W, Lin D, Rungsiyakull C, et al. Finite element based bone remodeling and resonance frequency analysis for osseointegration assessment of dental implants [J].Finite Elem. Anal Des, 2011, 47(8)∶898-905

Do IT and ISQ Reflect Primary Stability of Dental Implants？

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

[1]	HU Changqi, WEI Zhenyu, WEI Hongwu, XIA Xun, HUANG Jiangqin, GONG Jinmei, GUO Shuigen. A Retrospective Study on Efficacy of Short Implants (≤6 mm) in Atrophic Posterior Tooth Area for 5-7 Years [J]. Journal of Oral Science Research, 2021, 37(1): 58-62.
[2]	ZHOU Liwei. A Retrospective Study on Occurrence of Mechanical Complications in Multi-unit Posterior Implants Combining Screw Fixation with Adhesive Fixation [J]. Journal of Oral Science Research, 2021, 37(1): 63-66.
[3]	LIU Jianguo, ZHOU Hongbo. Development of β-type Medical Titanium Alloys’ Performance [J]. Journal of Oral Science Research, 2020, 36(6): 501-508.
[4]	ZHOU Yanmin, WANG Hanchi. A Review on Recent Update and Development in Implant Prosthesis and Its Complications [J]. Journal of Oral Science Research, 2020, 36(5): 405-409.
[5]	WU Qianju, ZHANG Zhisheng, LIN Zhiming, JIN Di, ZHANG Yi , LUO Bizhu. Antimicrobial Effect of A Novel Titanium Implant Incorporated with Bioactive Ion [J]. Journal of Oral Science Research, 2020, 36(3): 247-250.
[6]	JIA Shengnan, DI Ping, LIN Ye. Remodeling Pattern of Mandible after “All-on-4” Immediate Fixed Rehabilitation: A Radiographic Study [J]. Journal of Oral Science Research, 2020, 36(10): 957-961.
[7]	CHEN Jun-liang, LIU Xu-lin, ZHANG Xiao-yue, TIAN Xin, HE Yun. Three-dimensional Finite Element Analysis of Short Implant Supported Mandibular Second Molar with Dramatically Absorbed Alveolar Bone [J]. Journal of Oral Science Research, 2019, 35(3): 246-250.
[8]	ZHOU Qiang-qiang, LIAO Hong-bing.. Research Progress on Mechanical Principle of Retention and Cause of Loosening of Screws in Implant-supported Single Crown. [J]. Journal of Oral Science Research, 2019, 35(2): 122-124.
[9]	WANG Yanling, DING Hong, HE Wei, ZHU Lansheng, LIU Aiqun, XU Xiaoting. Experimental Study on Osseointegration of Micro-arc Oxidized Hydroxyapatite Coated Titanium Implants [J]. Journal of Oral Science Research, 2019, 35(11): 1070-1073.
[10]	LI Zhijin, WENG Yanming, ZHOU Ronghua, DU Jiao, XIONG Caihua, DONG Qingshan, GUO Jiaping. Management of Nasopalatine Canal Associated with Implant Placement in Maxillary Central Incisor Sites: A Pilot Study. [J]. Journal of Oral Science Research, 2019, 35(10): 948-952.
[11]	WEI Song-guan, LIAO Hong-bing. Research Progress on Clinical Application of Single Implant Restoration with Different Crown-to-implant Ratios [J]. Journal of Oral Science Research, 2018, 34(8): 812-814.
[12]	ZHU Yu-chi, WANG Yu-wei, GUO Xiao-dong, BAO Chong-yun, WANG Liao. Effect of Different Bone Condensation Methods on Bone Remodeling after Implantation [J]. Journal of Oral Science Research, 2018, 34(7): 717-720.
[13]	WANG Li-ping, GUO Xue-qi, DONG Yu, CHEN Xi-li, CHEN Wei-hong, GE Lin-hu. Short-term Clinical Effect Evaluation of Trausim Implants [J]. Journal of Oral Science Research, 2018, 34(6): 675-678.
[14]	ZHOU Yan-min, WANG Han-chi, ZHAO Jing-hui, LIU Chun-ying, WANG Nan.. A Review on Recent Update and Development in Surface Modification of Dental Implants. [J]. Journal of Oral Science Research, 2018, 34(4): 343-346.
[15]	QIN Feng-li, WANG Chao, LIU Ting, YU Ti, HUANG Yuan-ding. Bone Healing of Customized 3D Printed Porous Titanium Root-analogue Implants in Vivo [J]. Journal of Oral Science Research, 2018, 34(12): 1337-1341.