Loading...

Archive

    28 October 2025, Volume 41 Issue 10 Previous Issue    Next Issue

    For Selected: Toggle Thumbnails
    Research Progress in Effect of Thyroid Disease on Dental Implant
    XIA Yutian, LI Shue
    2025, 41(10): 833-837.  DOI: 10.13701/j.cnki.kqyxyj.2025.10.001
    Abstract ( 107 )   PDF (813KB) ( 81 )  
    Dental implant is one of the main restorative methods for dentition defects, and the initial stability of the implant, the healing of hard and soft tissues, and the health of the mucosa around the implant have a significant impact on the prognosis of dental implant. Thyroid disorders are a large group of common clinical endocrine disorders. Abnormal thyroid hormone levels can be the cause of bone metabolism disorders, mucosal tissue oedema and other problems. Related treatments for thyroid disease (drug therapy, radiotherapy) can also incur certain complications. The aim of this article is to analyze the impact of thyroid disorders and their associated treatments on implant restorations, and to provide guidance and assistance in predicting and avoiding implant restoration risks, and improving clinical prognosis.
    References | Related Articles | Metrics
    Research Advances in Effect of Melatonin on Alveolar Bone Metabolism during Orthodontic Tooth Movement
    ZHONG Run, LIU Ting
    2025, 41(10): 838-843.  DOI: 10.13701/j.cnki.kqyxyj.2025.10.002
    Abstract ( 79 )   PDF (846KB) ( 59 )  
    Orthodontic tooth movement is the core treatment process in orthodontics. The metabolism of alveolar bone, which includes bone resorption on the pressure side and bone formation on the tension side, forms the basis of orthodontic tooth movement. Under the action of orthodontic force, the periodontal environment transforms into an inflammatory state, which disrupts the balance between bone formation and bone resorption in the alveolar bone, and excessive bone resorption becomes a challenging issue to control in orthodontic treatment. As an endogenous indole hormone, melatonin has been demonstrated to process a variety of physiological functions in recent years, such as regulating biorhythms, anti-inflammation, anti-oxidation, and immunomodulation. In the inflammatory microenvironment, melatonin can promote the osteogenic effects in bone metabolism through mechanisms such as osteoprotection, antioxidation, anti-inflammation, and the modulation of vascular function. Moreover, the key pathways by which melatonin exerts its regulatory effects in bone metabolism are similar to those related to alveolar bone metabolism during orthodontic tooth movement, suggesting that melatonin may play a crucial role in alveolar bone metabolism during the process of orthodontic tooth movement. In view of the positive role of melatonin in alveolar bone metabolism, this paper reviews the research progress of effect of melatonin on alveolar bone metabolism during orthodontic tooth movement.
    References | Related Articles | Metrics
    Progress in Mechanism of Natural Drug Active Ingredients Against Radiation-induced Salivary Gland Damage
    MA Yushuo, XU Hui
    2025, 41(10): 844-848.  DOI: 10.13701/j.cnki.kqyxyj.2025.10.003
    Abstract ( 62 )   PDF (821KB) ( 43 )  
    As an important treatment for malignant lesions of head and neck, radiotherapy can cause irreversible salivary gland radiation damage, which seriously affects the quality of life of patients.Natural medicine has attracted much attention due to its excellent biocompatibility and low toxicity.Studies have shown that these active ingredients regulate cell signaling pathways through multiple pathways such as antioxidant, anti-inflammatory and protection of cells from oxidative stress damage, alleviating radiation-induced inflammatory response and apoptosis, thereby protecting salivary gland function.This article comprehensively analyzes the latest research on the active components of natural drugs such as phenols, terpenes, polysaccharides, benzophenones, and benzopyrenes, and discusses their mechanisms of action and research progress in preventing radiation-induced salivary gland damage through c-Jun N-terminal kinase (JNK), nuclear factor kappa-B (NF-κB), mechanistic target of rapamycin (mTOR), and p53 signaling pathways.
    References | Related Articles | Metrics
    Single-cell Sequencing Resolves Heterogeneity in Mandible and Limb Bud Development
    JIN Siyu, ZHANG Conghui, JI Wei
    2025, 41(10): 849-855.  DOI: 10.13701/j.cnki.kqyxyj.2025.10.004
    Abstract ( 60 )   PDF (6110KB) ( 40 )  
    Objective: To investigate the differentiation trajectories and cellular functions of mesenchymal stem cells (MSCs) in different tissue sites by comparing the cellular composition of mandible and limb buds of mouse embryos from embryonic day 10.5 (E10.5) to day 15.5 (E15.5). Methods: Single-cell RNA sequencing (scRNA-seq) datasets of mandible and limb buds from mouse E10.5 to E15.5 were integrated from literature. The Seurat package was used for dimensionality reduction, clustering, and cell annotation to isolate mandible MSCs (m-MSCs) and limb bud MSCs (l-MSCs) subsets. Pseudotime differentiation trajectories were constructed using the monocle3 package. Differential gene analysis, along with Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) functional enrichment analyses, were employed to systematically analyze the dynamic gene expression and functional differences between m-MSCs and l-MSCs. MSCs from the mandibular periosteum (m-MSCs) and long bone periosteum (l-MSCs) were extracted and subjected to in vitro osteogenic and chondrogenic induction differentiation experiments, with their differentiation potential assessed by qPCR. Results: The scRNA-seq analysis revealed that during early bone tissue development, m-MSCs (E10.5) and l-MSCs (E11.5) exhibited highly similar transcriptomes, with only 36 differentially expressed genes (DEGs). As development progressed, the number of DEGs between m-MSCs (E14.5) and l-MSCs (E15.5) increased to 273. Notably, m-MSCs continuously expressed stem cell marker genes (e.g., Prrx1, Cxcl12, Pdgfra, and Cd200) from E10.5 to E14.5, while these markers significantly declined in l-MSCs from E11.5 to E15.5. In the early stages, l-MSCs exhibited high expression of Sox9 and Col2a1, with enrichment of chondrogenesis-related pathways, whereas m-MSCs demonstrated precocious activation of Runx2. In vitro experiments confirmed that under basal conditions, adult m-MSCs showed significantly increased Runx2 expression compared to l-MSCs, while the latter displayed elevated Sox9 expression. Conclusion: The MSCs from different tissue sites exhibited different cellular fate determination and differentiation capacities. Particularly, the m-MSCs demonstrated relatively stronger osteogenic capacity compared to l-MSCs.
    References | Related Articles | Metrics
    Study on Role of High Sugar Microenvironment in Affecting Repair of Pulpal Injuries by Remodelling Extracellular Matrix
    DU Guilin, LIU Xiaochen, ZHANG Qi
    2025, 41(10): 856-866.  DOI: 10.13701/j.cnki.kqyxyj.2025.10.005
    Abstract ( 64 )   PDF (13005KB) ( 37 )  
    Objective: To investigate the changes in the extracellular matrix (ECM) of dental pulp in a high glucose microenvironment and its effect on the migratory capacity of dental pulp stem cells (DPSCs) and repair of pulpal injuries. Methods: Eight-week-old male Wistar rats and GK rats were selected and stained with hematoxylin-eosin (HE) to observe the morphology of the dental pulp. Matson staining and immunohistochemical staining were used to detect the collagen fiber content and cross-linking in the pulpal ECM. Bio-type AFM was used to detect the stiffness of the pulpal ECM. A model of pulpal damage repair was established, and Micro-CT scanning reconstruction and HE staining were used to evaluate the repair of pulpal damage. CD146 and STRO-1 immunofluorescence co-staining was used to locate DPSCs. Immunofluorescence staining, scratch assay, and Transwell assay were used to detect the morphology, migration ability, and expression of mechanical signalling molecules of hDPSCs in glucose cross-linked ECM. An in vitro and in vivo model of ALT-711 inhibition of glucose cross-linking in ECM was constructed, and the morphology, migration capacity, and mechanosignalling molecules of hDPSCs were examined in relation to the repair of pulpal injury. Results: In the high glucose group, the pulp cross-sectional area was reduced, collagen fiber content was increased, the expression of collagen I (COL 1) and advanced glycation end-products (AGEs) was up-regulated, and the stiffness was increased. After pulpal injury, the high glucose group did not form restorative dentin bridges, pulpal ectopic calcification was significant, and CD146+ STRO-1+ DPSCs were distributed far from the injury site. In the glucose cross-linked ECM, hDPSCs had reduced area and shape factor, decreased migration ability, and increased expression of ITG-alpha 5 beta 1 and Yes-associated protein (YAP). hDPSCs in the high-glucose group formed restorative dentin bridges, ectopic calcification was reduced, and CD146+ STRO-1+ DPSCs were distributed far from the injury site after the ALT-711 intervention. After ALT-711 intervention, the formation of restorative dentin bridges and ectopic calcification were reduced in the high glucose group, CD146+ STRO-1+ DPSCs were distributed near the injury site, and the morphology and migration of hDPSCs were improved and the mechanical signals were weakened. Conclusion: The high glucose microenvironment induces abnormal deposition and excessive cross-linking of pulpal ECM collagen, which in turn leads to impaired migration of DPSCs and impaired pulpal damage repair through activation of the ITG-YAP mechanical signalling axis. Targeted inhibition of ECM glucose cross-linking can rescue the impaired migration ability and abnormal mechanical signals of DPSCs and promote pulpal injury repair.
    References | Related Articles | Metrics
    Bibliometric Analysis of Clinical Efficacy of Zirconia Ceramics in Posterior Implant Restorations
    SU Qiang, ZHAO Wei, YANG Yun, LI Yiqiao, LIU Ruirui
    2025, 41(10): 867-874.  DOI: 10.13701/j.cnki.kqyxyj.2025.10.006
    Abstract ( 65 )   PDF (4355KB) ( 24 )  
    Objective: To explore the current status, research hotspots, and development trends of zirconia ceramics in posterior implant restorations in the past two decades (2004-2024). Methods: Literature from 2004 to 2024 was retrieved from the Web of Science Core Collection. VOSviewer 1.6.20 and CiteSpace 6.1.R2 were used to conduct retrospective bibliometric analysis and generate visual maps of author collaboration, keyword co-occurrence, and topic evolution. Results: A total of 95 articles from 22 countries and 131 institutions were included. The number of publications increased significantly after 2012. Frequent keywords indicated a strong focus on mechanical properties, esthetic performance, and digital manufacturing. Topic evolution showed a shift from material-focused studies to clinical outcomes, particularly the performance and long-term survival of monolithic zirconia restorations. The co-citation publications mainly focuses on systematic reviews and clinical trials, focusing on restoration strength, aesthetic durability and complication control, which are the core components of the knowledge structure in this field. International collaboration remains limited, with Chinese research mostly conducted by single institutions. Conclusion: Zirconia ceramics has become a key material for posterior implant restorations. Future studies should focus on wear behavior, esthetic optimization, and long-term clinical performance, along with strengthened global collaboration and technological integration.
    References | Related Articles | Metrics
    Study on Standardized Imaging Analysis Methods for Single-rooted Tooth Site Preservation in Rats
    YANG Zhikang, LI Ling, PENG Tiwu, REN Guanghui, WANG Xinluan, JIANG Yuxi, LIU Zhonghao
    2025, 41(10): 875-882.  DOI: 10.13701/j.cnki.kqyxyj.2025.10.007
    Abstract ( 55 )   PDF (10747KB) ( 27 )  
    Objective: To establish a standardized alveolar bone defect model in Sprague-Dawley (SD) rat single-rooted teeth guided by micro-computed tomography (Micro-CT) anatomical analysis, develop quantitative region-of-interest (ROI) parameters, and validate the analytical protocol's feasibility for bone regeneration assessment. Methods: Fifteen 5-month-old male SD rats were randomized into three groups: anatomical analysis group for micro-CT guided defect parameter determination, blank control (Control) and positive (guided bone regeneration, GBR) groups for verification. The standard defect (2 mm diameter × 2 mm depth) was created in the maxillary first molar. Micro-CT was used to analyze the quantified buccal bone height loss (BBHL) and regenerated bone parameters. Results: A standardized alveolar bone defect model was successfully established in SD rats, preserving intact adjacent teeth and a buccal bone wall thickness of (0.36±0.06) mm in the defect region, consistent with the morphological characteristics of single-rooted tooth defects in clinical. At 8 weeks post-operation, compared to the Control group, the GBR group demonstrated significant reductions in BBHL at both the midpoint and lowest point, as well as in trabecular separation (Tb.Sp) (P<0.05). Concurrently, the GBR group exhibited a significant increase in bone volume fraction (BV/TV) (P<0.05) and improvements in trabecular thickness (Tb.Th) and trabecular number (Tb.N). Conclusion: This micro-CT-guided protocol establishes a reproducible thin-wall alveolar defect model to mimic single-rooted teeth with standardized analytical parameters, providing a reliable preclinical evaluation tool for alveolar ridge preservation techniques and bone regeneration material development.
    References | Related Articles | Metrics
    Exploring Composition and Succession of Peri-implant Microbiota Based on Metagenomics
    LIU Yibing, XIANG Yufei, LI Jiayin, GUO Jiating, LIANG Wei, LI Mengting, ZHOU Shuo, CUI Xiaoxuan, ZHOU Qin
    2025, 41(10): 883-889.  DOI: 10.13701/j.cnki.kqyxyj.2025.10.008
    Abstract ( 45 )   PDF (6170KB) ( 24 )  
    Objective: To explore the composition and successional process of the microbial community surrounding dental implants. Methods: Samples of peri-implant and adjacent gingival crevicular fluid were collected from 19 patients at different stages after dental prosthesis placement (30 minutes, 1 week, 2 weeks, 3 weeks, and 4 weeks). The composition of the microbial community was analyzed using metagenomic sequencing technology. Results: The species diversity and abundance of dental implants were lower compared to natural teeth. There were 4, 8, and 18 species with differences between natural teeth and dental implants at the phylum, genus, and species levels, respectively. The genera Actinomyces and Capnocytophaga were the major contributors to these differences. At the genus level, Streptococcus was the most abundant genus in all four groups of dental implants; at the species level, the abundance change patterns of the top 200 species across different time points were complex. Conclusion: A relatively complex microbial community had formed around the implants one week after prosthesis placement, with Streptococcus being the pioneer species.
    References | Related Articles | Metrics
    Study on Accuracy of Scanned Impressions of Edentulous Mandibular Implants and Conventional Impressions using Digital Wings Scanning Body
    HUANG Jing, LU Qinyi, XU Peng, LIANG Yuan
    2025, 41(10): 890-895.  DOI: 10.13701/j.cnki.kqyxyj.2025.10.009
    Abstract ( 48 )   PDF (1818KB) ( 32 )  
    Objective: To investigate the effect of Digital Wings scanning body on the accuracy of oral scanning impression technique for edentulous maxillary implants, analyze its performance in several intraoral scanning groups, and compare its accuracy with that of the traditional impression technique. Methods: Root mean square (RMS) values for the trueness and precision of implant positions were obtained for conventional impression-taking group, intraoral scanning group, and standard model group using the best-fit method and the absolute linear deviation method. Results: RMS means of trueness for the conventional group, the normal scanner group, the new CAD scanner group, and the Digital Wings scanner group were 39.3 (29.9-50.5) μm, 135.1 (50.8-260.5) μm, 84.3 (53.2-212.5) μm, and 81.3 (33.8-133.2) μm, respectively. No significant difference was observed between the Digital Wings scanner group and the conventional mode-taking group (P>0.05). The RMS means of precision were 35.3 (12.4-98.5) μm, 155.4 (33.2-329.9) μm, 116.4 (4.4-349.8) μm, and 54.0 (13.4-124.6) μm, respectively. Additionally, no significant difference was found between the Digital Wings scanner group, the new CAD scanner group, and the traditional mode-taking group (P>0.05). Conclusion: There was no statistically significant difference in accuracy between the Digital Wings scanner group and the conventional group. Improvements in scan body design, such as changes in the shape of the scan body, have led to a gradual increase in scanning accuracy. However, more in vitro and clinical studies on edentulous implant scan body are needed.
    References | Related Articles | Metrics
    Clinical Study on Three Restoration Methods for Short Crown Molars
    WANG Xiaoxue, ZHANG Liya, LIU Qing, WU Suran, SHEN Wenjing, QIU Yafei
    2025, 41(10): 896-900.  DOI: 10.13701/j.cnki.kqyxyj.2025.10.010
    Abstract ( 66 )   PDF (2670KB) ( 55 )  
    Objective: To prospective study the clinical efficacy of three restoration methods for short crown molars. Methods: After root canal treatment, 68 short crown molars were repaired with lithium disilicate reinforced glass ceramic onlays (group A, n=36), fiber split post zirconia onlays (group B, n=17), and cast pure titanium split post metal onlays (group C, n=15). The clinical evaluation was performed 3 years later. Results: In group A, group B, and group C, the success rate of restoration was 88.9%, 94.1%, and 80.0%, and the survival rate of prostheses was 88.9%, 100.0%, and 93.3%, respectively, and the survival rate of abutments was 100.0%, 100.0%, and 93.3%, respectively, with no statistical significance (P>0.05). Conclusion: The three methods can achieve good clinical effect after root canal treatment of short crown molars, which can meet the repair needs of patients with short crown molars of different levels.
    References | Related Articles | Metrics
    In Vitro Comparative Study of Four Stamp Materials for Direct Composite Resin Restoration of Class Ⅰ Cavities in Posterior Teeth
    WANG Haojie, ZHANG Yunxiang, LI Min, ZHANG Lanrui, PAN Hong, CHU Yuanyuan
    2025, 41(10): 901-906.  DOI: 10.13701/j.cnki.kqyxyj.2025.10.011
    Abstract ( 58 )   PDF (1880KB) ( 60 )  
    Objective: To compare four types of matrices fabricated from different materials and evaluate the effects of different matrices on the clinical outcomes of direct composite resin restorations in posterior teeth with Class Ⅰ cavities. Methods: The in vitro experiment was conducted in two parts. Part Ⅰ: Forty resin-made right mandibular first molars from the same production batch were randomly divided into 4 groups: gingival protector stamp filling group (Group A), flowable resin stamp filling group (Group B), silicone rubber stamp filling group (Group C), and transparent silicone rubber stamp filling group (Group D). Stamp preparations were fabricated using four materials, and the time required for each stamp preparation was recorded. The number of bubbles generated in the stamps was examined. The occlusal morphology of the teeth in each group was scanned before filling. Class Ⅰ cavities of identical size were prepared, and direct composite resin restorations were performed using the four types of stamps. The post-filling occlusal morphology was scanned and compared three-dimensionally with the pre-filling morphology. The root mean square (RMS) values were calculated and analyzed. Part Ⅱ: Twenty-five freshly extracted third molars were randomly divided into 5 groups. In addition to the aforementioned four groups (A-D), a conventional resin filling group (Group E) was included. Class Ⅰ cavities with a depth of 4 mm were prepared and filled. After the cycle of heating and cooling, scanning electron microscopy (SEM) was used to observe the microleakage. Gap widths were recorded and quantitatively analyzed. Results: Part Ⅰ: The four groups showed statistically significant differences in preparation time, number of bubbles, and RMS values (P<0.05). Groups C and D required longer preparation times, produced more bubbles, and demonstrated higher RMS values, all showing statistically significant differences compared to Groups A and B (P<0.05). No statistically significant differences were observed between Groups A and B in any parameters (P>0.05). Part Ⅱ: No statistically significant differences were found among the five groups in terms of microleakage gap width and number of bubbles in the upper half of the resin (P>0.05). Conclusion: The high-flow light-curing resin material demonstrated excellent efficacy in precisely restoring the occlusal morphology of posterior Class Ⅰ cavities, exhibiting shorter preparation time and fewer air bubbles generated during fabrication. It represents a promising choice for the stamp technique in dental restorations.
    References | Related Articles | Metrics
    Exploring Impact of Two Facial Scanning Registration Methods on Registration Accuracy of Virtual Patients under Maximum Smile Condition
    YE Zihao, WEI Luming, WANG Penglai, LI Gan, YUAN Changyong
    2025, 41(10): 907-911.  DOI: 10.13701/j.cnki.kqyxyj.2025.10.012
    Abstract ( 41 )   PDF (2904KB) ( 25 )  
    Objective: To investigate the impact of different registration methods on the registration accuracy (including both precision and accuracy) of virtual patient facial scans under maximum smile conditions. Methods: Optical scanning data of 60 patients were collected using the Trios 3 intraoral scanner and the 3dMD facial scanner. Virtual patient scenarios in the maximum smile position were then constructed for the subjects using the forehead registration plate method and the facial landmark method, respectively. The differences in registration deviations between the two methods were analyzed through linear deviation measurement, and the registration accuracy of the two test groups was compared. Results: The forehead registration plate group demonstrated significantly better accuracy and precision than the facial landmark method, with statistically significant differences (P<0.05). Conclusion: Different facial scanning registration methods significantly affect accuracy when constructing virtual patient scenarios at maximal smile position. Compared to facial landmark method, forehead registration plate method achieves higher facial scan registration precision.
    References | Related Articles | Metrics
    AL Amyloidosis with Oral Mucosal Bullous Lesions as Initial Symptom: A Case Report
    ZHANG Jingrui, MENG Xin, MA Jun, LI Xinyu, XU Ke, WANG Maiquan, LIN Dongpeng, WANG Yonggong
    2025, 41(10): 912-915.  DOI: 10.13701/j.cnki.kqyxyj.2025.10.013
    Abstract ( 44 )   PDF (3344KB) ( 24 )  
    Systemic light-chain (AL) amyloidosis is a malignant disorder associated with clonal plasma cell dyscrasia. It is characterized by the production of misfolded and unstable immunoglobulin light chains, leading to multisystem amyloid protein deposition, progressive organ dysfunction, and eventual failure. Oral mucosal bullous amyloidosis (OMBA) refers to a rare clinical manifestation of amyloidosis involving the skin and oral mucosa, presenting as bullous lesions. OMBA often initially manifests as dysphagia and is easily confused with other bullous mucosal diseases, resulting in misdiagnosis or missed diagnosis. This report presents a case of AL amyloidosis with OMBA as the primary clinical feature, diagnosed and managed at the Department of Oral and Maxillofacial Surgery, Henan Provincial People's Hospital. Combined with a review of the literature, the report discusses the clinical characteristics, diagnostic approaches, and treatment strategies of this rare condition. The aim is to enhance awareness of this disease among dental practitioners and reduce the incidence of misdiagnosis and missed diagnosis.
    References | Related Articles | Metrics
    Digital Workflow for Early Complete Denture Treatment: A Case Report
    SUN Qianyue, ZHAO Lidan, LV Congcong, SHI Kaikai, WU Zhe
    2025, 41(10): 916-918.  DOI: 10.13701/j.cnki.kqyxyj.2025.10.014
    Abstract ( 50 )   PDF (3433KB) ( 32 )  
    With the improvement of living standards, patients' demand for restoration during the tooth loss period has been increasing. Early complete denture restoration after full-arch tooth extraction can avoid functional impairments and social embarrassment caused by prolonged tooth loss. However, the production process of traditional complete denture is complicated, requires frequent follow-up visits, and limits its application. Digital technology can simplify operational steps, shorten the diagnosis and treatment time, and preserve the occlusion and vertical dimension before tooth extraction, significantly enhancing the clinical feasibility of early complete dentures. This case report aims to utilize digital technology to fabricate early complete dentures by preserving patients' original occlusion relationship before tooth extraction, so as to effectively maintain occlusion, occlusion vertical dimension, and facial support during the healing of extraction sockets. This approach adds a humanistic touch to the treatment of complete dentures for patients with dentition defects.
    References | Related Articles | Metrics
    Extended Resection of Lingual Angiosarcoma: A Case Report
    LI Junfei, CAO Zhang, GAO Hong, YANG Yong, WANG Wenlong, JIA Gangjie, ZUO Jinhua
    2025, 41(10): 919-921.  DOI: 10.13701/j.cnki.kqyxyj.2025.10.015
    Abstract ( 46 )   PDF (4828KB) ( 40 )  
    Angiosarcoma (AS) is a rare malignant neoplasm of endothelial origin, with cases involving the oral cavity accounting for only 1% of all AS occurrences, and lingual AS being exceptionally rare. This article reports a case of lingual AS in a 76-year-old female patient, and through a literature review, explores the clinical manifestations, diagnostic challenges, and treatment strategies for this condition.
    References | Related Articles | Metrics
    Periodontal-restorative Multidisciplinary Treatment for Stage Ⅲ Grade C Periodontitis: A Case Report
    XU Nan, ZHANG Huihui, CAO Zhengguo
    2025, 41(10): 922-926.  DOI: 10.13701/j.cnki.kqyxyj.2025.10.016
    Abstract ( 59 )   PDF (7865KB) ( 30 )  
    Patients with Stage Ⅲ Grade C periodontitis often presents with tooth loss, mobility and displacement, requiring a multidisciplinary approach to design a personalized treatment plan that restores the integrity of the dentition, improves occlusal function, and meets aesthetic demands. This case report reports the sequential treatment process of a patient with severe periodontitis, including disease analysis, periodontal surgery, restorative treatment, supportive treatment, and 2-years follow-up observation.
    References | Related Articles | Metrics