Research Progress and Application Potential of Low-speed Drilling in Implant Surgery

doi:10.13701/j.cnki.kqyxyj.2024.10.001

Abstract

Abstract: Preparation of hard tissues for the implants is usually performed by conventional drilling (drilling at high-speed with irrigation). With the development of modern oral implantology, a new concept of low-speed drilling without irrigation shown the potential to be an alternative to the conventional drilling. Low-speed drilling also named as biologic drilling, comparing with conventional drilling which has many advantages, such as no irrigation, more precise, and avoiding autogenous bone loss. This article reviews the related literatures including in vitro, animal, and clinical studies to analyze the low-speed drilling from temperature change, osseointegration, drilling precision, and drilling time, in order to provide reference for further research and clinical application.

Key words: low-speed drilling, osseointegration, primary stability, autogenous bone

LIU Tengda, WANG Shuhong. Research Progress and Application Potential of Low-speed Drilling in Implant Surgery[J]. Journal of Oral Science Research, 2024, 40(10): 851-854.

References

[1] Sailer I, Karasan D, Todorovic A, et al. Prosthetic failures in dental implant therapy[J]. Periodontology 2000, 2022, 88(1): 130-144.
[2] Calvo-Guirado JL, Delgado-Peña J, Maté-Sánchez JE, et al. Novel hybrid drilling protocol: evaluation for the implant healing-thermal changes, crestal bone loss, and bone-to-implant contact[J]. Clin Oral Implants Res, 2015, 26(7): 753-760.
[3] Guglielmotti MB, Olmedo DG, Cabrini RL. Research on implants and osseointegration[J]. Periodontology 2000, 2019, 79(1): 178-189.
[4] Bernabeu-Mira JC, Pellicer-Chover H, Peñarrocha-Diago M, et al. In vitro study on bone heating during drilling of the implant site: Material, design and wear of the surgical drill[J]. Materials (Basel), 2020, 13(8):1921.
[5] Tsiagadigui JG, Ndiwe B, Ngo Yamben MA, et al. The effects of multiple drilling of a bone with the same drill bit: thermal and force analysis[J]. Heliyon, 2022, 8(2): e08927.
[6] Oh JH, Fang Y, Jeong SM, et al. The effect of low-speed drilling without irrigation on heat generation: an experimental study[J]. J Korean Assoc Oral Maxillofac Surg, 2016, 42(1): 9-12.
[7] Jamil M, Rafique S, Khan AM, et al. Comprehensive analysis on orthopedic drilling: A state-of-the-art review[J]. Proc Inst Mech Eng H, 2020, 234(6): 537-561.
[8] Al-Sabbagh M, Eldomiaty W, Khabbaz Y. Can osseointegration be achieved without primary stability?[J]. Dent Clin North Am, 2019, 63(3): 461-473.
[9] Monje A, Ravidà A, Wang HL, et al. Relationship between primary/mechanical and secondary/biological implant stability[J]. Int J Oral Maxillofac Implants, 2019, 34: s7-s23.
[10] Antonacci D, Del Fabbro M, Bollero P, et al. Clinical effects of conventional and underprepared drilling preparation of the implant site based on bone density: A systematic review and meta-regression[J]. J Prosthodont Res, 2023, 67(1): 23-34.
[11] 宿玉成.口腔种植学[M].北京:人民卫生出版社,2014.327-328.
[12] Gil LF, Sarendranath A, Neiva R, et al. Bone healing around dental implants: simplified vs conventional drilling protocols at speed of 400 rpm[J]. Int J Oral Maxillofac Implants, 2017, 32(2): 329-336.
[13] 王淼,王婉蓉,李明炜,等.简化钻孔法预备种植窝的临床观察[J].中华口腔医学杂志,2018,53(6): 404-407.
[14] Anitua E, Troya M, Zalduendo M, et al. The influence of alveolar bone healing degree on its potential as a source of human alveolar bone-derived cells[J]. Ann Anat, 2020, 232: 151578.
[15] Alam K, Qamar SZ, Iqbal M, et al. Effect of drill quality on biological damage in bone drilling[J]. Sci Rep, 2023, 13(1): 6234.
[16] Bernabeu-Mira JC, Peñarrocha-Diago M, Peñarrocha-Diago M, et al. Comparison of patient-centered outcomes measures between low-speed drilling without irrigation and high-speed drilling with irrigation: A randomized clinical trial[J]. Clin Oral Implants Res, 2024, 35(1):21-30.
[17] Delgado-Ruiz RA, Velasco Ortega E, Romanos GE, et al. Slow drilling speeds for single-drill implant bed preparation. Experimental in vitro study[J]. Clin Oral Investig, 2018, 22(1): 349-359.
[18] Kim SJ, Yoo J, Kim YS, et al. Temperature change in pig rib bone during implant site preparation by low-speed drilling[J]. J Appl Oral Sci, 2010, 18(5): 522-527.
[19] Jang HJ, Yoon JU, Joo JY, et al. Effects of a simplified drilling protocol at 50 rpm on heat generation under water-free conditions: an in vitro study[J]. J Periodontal Implant Sci, 2023, 53(1): 85-95.
[20] Gaspar J, Borrecho G, Oliveira P, et al. Osteotomy at low-speed drilling without irrigation versus high-speed drilling with irrigation: an experimental study[J]. Acta Med Port, 2013, 26(3): 231-236.
[21] Ozcan M, Salimov F, Temmerman A, et al. The evaluation of different osteotomy drilling speed protocols on cortical bone temperature, implant stability and bone healing: An experimental study in an animal model[J]. J Oral Implantol, 2022, 48(1): 3-8.
[22] Fujiwara S, Botticelli D, Kaneko N, et al. Effect of low-speed drilling without irrigation on osseointegration: an experimental study in dogs[J]. Oral Maxillofac Surg, 2022, 26(4): 595-601.
[23] Sigilião Celles CA, Ferreira I, Valente M, et al. Osseointegration in relation to drilling speed in the preparation of dental implants sites: A systematic review[J]. J Prosthet Dent, 2023:S0022-3913(23)00138-5.
[24] Tabassum A. Radiographic comparisons of crestal bone levels around implants placed with low-speed drilling and standard drilling protocols: Preliminary results[J]. Saudi Dent J, 2021, 33(8): 965-971.
[25] Pellicer-Chover H, Peñarrocha-Oltra D, Aloy-Prosper A, et al. Comparison of peri-implant bone loss between conventional drilling with irrigation versus low-speed drilling without irrigation[J]. Med Oral Patol Oral Cir Bucal, 2017, 22(6): e730-e736.
[26] Tabassum A, Kazmi F, Wismeijer D, et al. A prospective randomized clinical trial on radiographic crestal bone loss around dental implants placed using two different drilling protocols: 12-month follow-up[J]. Int J Oral Maxillofac Implants, 2021, 36(6): e175-e182.
[27] Soler-Alcaraz S, Guerrero-Sánchez Y, Pérez-Sayáns M, et al. Evaluation of change in radiographic fractal dimension around dental implants placed with low-speed drilling and standard drilling protocols[J]. J Clin Med, 2023, 12(6):2244.
[28] Anitua E, Piñas L, Alkhraisat MH. A novel technique for preparation of recipient site and autologous bone grafting in autotransplantation of single-rooted teeth: A report of two cases[J]. Cureus, 2022, 14(11): e31888.
[29] 周冬玲,王友君,黄震,等.不同原位取骨方法的种植体植入精度和获得自体骨骨量的比较[J].现代口腔医学杂志,2022,36(4): 235-238.
[30] 李维婷,李蓬,朴牧子,等.不同备洞方法收集自体骨骨量[J].北京大学学报(医学版),2020,52(1): 103-106.
[31] Liang C, Lin X, Wang SL, et al. Osteogenic potential of three different autogenous bone particles harvested during implant surgery[J]. Oral Dis, 2017, 23(8): 1099-1108.
[32] Chen CH, Coyac BR, Arioka M, et al. A novel osteotomy preparation technique to preserve implant site viability and enhance osteogenesis[J]. J Clin Med, 2019, 8(2):170.
[33] Tabassum A, Wismeijer D, Hogervorst J, et al. Comparison of proliferation and differentiation of human osteoblast-like cells harvested during implant osteotomy preparation using two different drilling protocols[J]. Int J Oral Maxillofac Implants, 2020, 35(1): 141-149.
[34] Han Y, Cai C, Lv Q, et al. Effect of process parameters on the temperature changes during robotic bone drilling[J]. Proc Inst Mech Eng H, 2022, 236(8): 1129-1138.
[35] Jamil M, Khan AM, Mia M, et al. Evaluating the effect of micro-lubrication in orthopedic drilling[J]. Proc Inst Mech Eng H, 2019, 233(10): 1024-1041.